SID Dispatch - Home
Is Technology Ready to Support XL Touchscreens?
FEB 03, 2017 16:01 PM
A+ A A-

Is Technology Ready to Support XL Touchscreens?

By Dr. Vasileios Zagkanas, Head Application Engineer, Fieldscale PC.

Diverse touch sensor technologies and their challenges

It is remarkable that after all these years of touchscreen evolution there are still so many different technologies behind touch sensors, all developed in parallel to one another. The huge diversity of technologies is driven by the different applications and specialized requested features of them. The touch panel of a museum info kiosk, for example, is based on surface acoustic wave (SAW) technology offering high durability while on the other hand, gaming tables such as casino machines, rely on projected-capacitive touch sensors with increased sensitivity and multi-touch capabilities.

               Is there a clear winner? Recent developments say maybe.

 Today, over 95% of all touchscreens are made of capacitive or analog resistive touch sensors.

Touch Sensor Technologies
Projected Capacitive
Analog Resistive
Surface Capacitive
Surface Acoustic Wave
Traditional Infrared
Camera-based Optical

Some of the most popular touch sensor technologies of 2016.


New requirements such as better touch and proximity performance, lower power consumption, and higher noise immunity emerge and they all challenge technology’s limitations. The growing demand for large-format multi-touch panels and large curved screens present an even greater challenge.

The maximum size of the touch sensors that can be produced commercially at reasonable costs varies among touch technologies. That size also increases year by year, as the technology evolves. Geoff Walker’s report, published in 2010, provides a detailed account of touch sensors’ sizes according to type: the largest touch sensors can be built based on “traditional” infrared or camera-based technology.

One of the largest touchscreens today is the really enormous (10m x 2.8m) - and impressive - “Reality Touch Theater” of the University of Groningen. With 16 infrared illuminators and 6 cameras, it can detect more than 100 simultaneous touches!

The impressive “Reality Touch Theater” of the University of Groningen. Published by University of Groningen, 2011.


Is it infrared then? No. Some of the technology’s disadvantages like the vulnerability to external light and increased response times have led researchers to a different direction.

Projected-capacitive technology is taking the lead

Look back to 2010 and you’ll be surprised to note that today’s most popular technology, i.e. projected-capacitive, was standing at the lower end of the size list (graph).

Maximum size of touch sensors depending on their type.

So how did it evolve so fast? The answer lies in the material. Initially, Indium Tin Oxide (ITO) was the transparent conductive material that replaced the original, more expensive Antimony Tin Oxide (ATO). However, its relatively high resistivity still remained an obstacle for the construction of larger-format sensors, lower as it may be to that of ATO. As touch sensors’ sizes increase, their electrode length increases as well. This causes higher resistance, leading to higher time constant (RC product) which causes a slower response and poor sensor performance.

The need for low resistivity transparent conductive materials led to “ITO-alternatives”. Although ITO still holds 70% of the touchscreen market, “ITO-alternatives” technology enabled projected-capacitive panels to progress and be widely used today in large-format screens that often exceed 100 inches.  Some of those are carbon nanotubes, conductive polymers, nanobuds, graphene, silver nanowires, and metal mesh. Metal mesh, a conductive grid usually made of silver, copper, or aluminum, seems to hold an advantage over its competitors. It combines low resistivity (generally less than 25 Ohm/sq.) with high optical transmission (over 85%) and both at a relatively low cost. Low resistivity also offers high touch sensitivity, allowing for the usage of thick cover glass.

Size of projected-capacitive touchscreens against sheet resistance depending on electrode material.


If the current trend tells us something, it is that projected-capacitive panels will remain the predominant touch technology in the forthcoming years as the use of metal mesh removes ITO limitations and expands the boundaries of touchscreen industry. We will discuss our findings on the effects of metal mesh density and cover glass thickness on the performance of projected-capacitive touch screens through simulation, at the Electronic Display Conference 2017, in Nuremberg.



Dr. Vasileios Zagkanas, Head Application Engineer, Fieldscale PC

Fieldscale develops simulation apps for hardware product design. Fieldscale SENSE is the first touchscreen design and simulation tool, achieving the highest accuracy, speed and simplicity.

[%= name %]
[%= createDate %]
[%= comment %]
Share this:
Please login to enter a comment:

Computing Now Blogs
Business Intelligence
by Ray Major
Agile Careers: by Jim Coplien
Cloud Computing
A Cloud Blog: by Irena Bojanova
The Clear Cloud: by STC Cloud Computing
Enterprise Solutions
Enterprise Thinking: by Josh Greenbaum
Inspired by Games: by Joann Hoffman and Wanda Meloni
Healthcare Technologies
The Doctor Is In: Dr. Keith W. Vrbicky
Hot Topics
NealNotes: by Neal Leavitt
Industry Trends
Internet Of Things
prpl Matters: by Art Swift
Mobile Computing
Shay Going Mobile: by Shay Shmeltzer
NGN-Insights: by Martin Nuss and Uday Mudoi
No Batteries Required: by Ray Kahn
Software Technologies: by Christof Ebert