The Community for Technology Leaders
Green Image
Issue No. 03 - March (2013 vol. 62)
ISSN: 0018-9340
pp: 548-560
Liang Lu , Queen's University Belfast, Belfast
Weiqiang Liu , Queen's University Belfast, Belfast
Máire O'Neill , Queen's University Belfast, Belfast
Earl E. Swartzlander , University of Texasat Austin, Austin
ABSTRACT
Quantum-dot Cellular Automata (QCA) technology is a promising potential alternative to CMOS technology. To explore the characteristics of QCA and suitable design methodologies, digital circuit design approaches have been investigated. Due to the inherent wire delay in QCA, pipelined architectures appear to be a particularly suitable design technique. Also, because of the pipeline nature of QCA technology, it is not suitable for a complicated control system design. Systolic arrays take advantage of pipelining, parallelism, and simple local control. Therefore, an investigation into these architectures in semiconductor QCA technology is provided in this paper. Two case studies, (a matrix multiplier and a Galois Field multiplier) are designed and analyzed based on both multilayer and coplanar crossings. The performance of these two types of interconnections are compared and it is found that even though coplanar crossings are currently more practical, they tend to occupy a larger design area and incur slightly more delay. A general semiconductor QCA systolic array design methodology is also proposed. It is found that by applying a systolic array structure in QCA design, significant benefits can be achieved particularly with large systolic arrays, even more so than when applied in CMOS-based technology.
INDEX TERMS
Clocks, Arrays, Wires, Layout, Delay, Nonhomogeneous media, Logic gates, multilayer crossover, Quantum-dot Cellular Automata, systolic array, matrix multiplier, Galois Field multiplier, coplanar crossing
CITATION
184 ms
(Ver 3.3 (11022016))