Cover Art (PDF)

Title Page i (PDF)

Title Page iii (PDF)

[Copyright notice] (PDF)

Table of contents (PDF)

Preface (PDF)

Organizing Committee (PDF)

Technical Program Committee (PDF)

Reviewers (PDF)

A 5-80MHz CMOS Gm-C Low-Pass Filter with On-Chip Automatic Tuning (Abstract)

A New Type Reducer Design Method of First Selection (Abstract)

A Cohesive Zone Model in Adhesive Bonding Joint Based on MSC.marc (Abstract)

A Comprehensive EF-Based and AHP Integrated Approach to Construct Land Use Sustainable Evaluation Model (Abstract)

A Design of CAN-bus Test System Based on Volkswagen PASSAT B5 (Abstract)

A Fast Approach to Judging Basic Element Intersection in Polygons Meshing (Abstract)

A Fuzzy Control Method Based on Information Integration for Double Inverted Pendulum (Abstract)

A Hierarchical Algorithm for Document-Images Fast Matching (Abstract)

A High Efficiency TANDEM Pulsed MAG Welding Machine (Abstract)

A Loss Assessment Design Method Based on SOA for Insurance Informationization (Abstract)

A Method of Second Wavelet Transform Automated Threshold for Partial Discharge Signal Extraction (Abstract)

A Micro Wall-Climbing Robot Using Shape Memory Alloy (Abstract)

A Middleware Architecture for Sensor Networks Applied to Industry Solutions of Internet of Things (Abstract)

A Mixed Noise Filter Acceleration Algorithm Based on Mean Value and Variance Similarity (Abstract)

A Modified Vector Control of PMSM Based on Matrix Converter (Abstract)

A New Method to Fault Diagnosis for Circuit Breakers Based on Characteristic Entropy of Wavelet Packet (Abstract)

A New Method to Mechanical Fault Classification with Support Vector Machine (Abstract)

A Non-singular Terminal Adaptive Fuzzy Sliding-Mode Controller (Abstract)

A Novel BTEX Gas Sensor Utilizing Cataluminescence on Nanosized Bi4MnO8 (Abstract)

A Novel Dual-Boost DC-AC Circuit for PV Inverter (Abstract)

A Novel Laser Multidirection Network Measurement System (Abstract)

A Novel Method for Detecting Encroachments on Transmission Lines Based on Visual Attention (Abstract)

A Novel Template-Based Change Detection Technique for Harbor Ship Target (Abstract)

A Parameter Identification Method of Induction Motor Based on Three Level Inverter (Abstract)

A Robust Method for Vanishing Point Estimation in Road Image (Abstract)

A SOOA Based Distributed Computing Mechanism for Road Traffic Noise Mapping (Abstract)

A Status of Study on Icing of Wind Turbine Blades (Abstract)

A Study on the Application of GPC Implicit PID Algorithm in the Heat Exchanging Station Control System (Abstract)

A Study on Modern Agricultural Products Logistics Supply Chain Management Mode Based on IOT (PDF)

A Voltage Control Scheme of Distribution Static Synchronous Compensator Based on Current Sensorless (Abstract)

Acceleration of Ion Diffusion Due to the Electromagnetic Effects of Ion Currents in Nanochannels (Abstract)

Achieving Fair Service with a Layered Scheduling Scheme for CICQ Switches (Abstract)

Active Tracking Unknown Surface Based on Force Control for Robot (Abstract)

Adaptive Control for a Class of Uncertain Interconnected Time-Delay System (Abstract)

Adaptive Inverse Control of Offshore Jacket Platform Based on Grey Prediction (Abstract)

Adaptive Load-Balanced Routing Algorithm (Abstract)

Adaptive Residual Current Circuit Breaker Based on Microcontroller (Abstract)

Adsorption of Cr (VI) from Aqueous Solution by Cetylpyridinium Bromide (CPB) Modified ZeoLite: Kinetic, Equilibrium and Thermodynamics Study (Abstract)

Aerodynamic Drag Reduction Design of Van Body Truck by Numerical Simulation Method (Abstract)

An Adaptive Control Method of Shunt Active Power Filter DC Bus Voltage (Abstract)

An Approach for Calculating Semantic Similarity between Words Using WordNet (Abstract)

An Experimental Research on the Trepanning Moulds with Frame Electrode of Small Copper Tube by EDM (Abstract)

An Improved Micro Hard Disk Read-Write Channel Servo Signal Simulate System Design (Abstract)

An Investigation of Misalignment to Contact Path of Face-Gear Drives (Abstract)

Analysis of Injection Molding of Thin-Walled Parts Based on Moldflow (Abstract)

Analysis on Liquid-Tanker Vehicle Liquid and Solid Coupling Collision Simulation (Abstract)

Analysis on the Influence of Structure Parameters on Workspace of a Novel Palletizing Robot (Abstract)

Analyzing the Variety of Customer Needs for Product Family Design by Integrating Conjoint Analysis and Quality Function Deployment (Abstract)

Application of 3D Laser Scanning Technique in the Conservation of Geotechnical Cultural Relics in China (Abstract)

Application of Daubechies Wavelet Transform in the Estimation of Standard Deviation of White Noise (Abstract)

Application of Numerical Simulation Technology to Prediction of Aerodynamic Dipole Acoustics Source on Automobile Surface (Abstract)

Application of the Wavelet Analysis and Hilbert-Huang Transformation in the Gear Reducer Fault Diagnosis (Abstract)

Applications of Rare-Earth Thermal Diffusion Technology in Plastic Injection Mould Cavity Surface Treatment (Abstract)

Applying the Radio over Fiber Technique to Broadband Wireless Access (Abstract)

Assessment of Land Use and Ecosystem Services Change in the Ecologically Transitional Zone (Abstract)

Asymptotic and Time-Limited Synchronization of Uncertain Unified Chaotic System Based on Lyapunov Function (Abstract)

Automatic Transmissions Diagnosis Based on Fuzzy Neural Network (Abstract)

Aviation Tool Wear States Identifying Based on EMD and SVM (Abstract)

Base on Fluid-Structure Coupling Transient Impact Analysis of Particular Structure (Abstract)

Based on Ansys Drilling Machine Hook's Dynamic Characteristic (Abstract)

Based on the Simulation Analysis of the Foamed Aluminium for Load-Reducing Effect of a Device Instantaneous Impact (Abstract)

Bean Moisture Content's Measurement Based on RBF Neural Network (Abstract)

Biodegradation of Microcystin-RR Extracted from Cyanobacterial Blooms by Sphingopyxis sp.USTB-05 (Abstract)

Blue Organic Light-Emitting Device Based on Dopant TBP (Abstract)

CA6140 Lathe CNC Turret Design Transformation (Abstract)

Calculation and Analysis of Temperature Field for Planar Motor Based on 3D FEM (Abstract)

Calculation and Analysis of Traction Infinitely Variable Transmission (Abstract)

Cathode Design for NC Precision Electrochemical Machining Integer Impeller Based on CFD (Abstract)

Characteristics of Dewatered Sewage Sludge and Green Waste Co-composting (Abstract)

Characteristics of Sediment Yield and Its Relation to Land Use of Laohahe Drainage Basin in Liaoning Province, P.R. China (Abstract)

Chemical Passivity of Pb in Ore Soil by Using Improved Red-Mud Materials (Abstract)

Classification Learning System Based on Multi-objective GA and Microthermal Weather Forecast (Abstract)

Research and Discussion on the Electrical Fault of the CNC Machine (Abstract)

Coal Mine Gas Wireless Monitoring System Based on WSNs (Abstract)

Colliery Gas Detection System Applying Fuzzy Theory Based on DSP (Abstract)

Computational Prediction Model of Macrosegregation in Continuously Casting Steel Blooms (Abstract)

Concentration Distribution of PAHs in the Filter and Foam from the Air (Abstract)

Constrained Batch-to-Batch Optimal Control for Batch Process Based on Support Vector Regression Model with Batchwise Error Feedback (Abstract)

Control of Appearance Quality of Concrete of Qi He Bridge of Jing Zhu Expressway (Abstract)

Cracking Mechanism of Deep-Sea Cobalt-Rich Crusts with Water Jet (Abstract)

Damping Characteristic of Composite Material with Periodic Micro-Tetrahedron Structures (Abstract)

Data Acquisition and Status Mornitoring on Life Prediction Research: Based on the Crane's Monitoring and Life Perdition Technology (Abstract)

Cutter Cutting Cobalt-Rich Crusts with Water Jet (PDF)

Degree of Compaction Factor Analysis of Construction of Shallow Road Bed Affect (Abstract)

Design and Realization of a High-Performance Integrated Attitude Determination System and Hybrid Simulation (Abstract)

Design an Intelligent Environment Control System for GreenHouse Based on RS485 Bus (Abstract)

Design and ASIC Implementation of High-Speed DDC (Abstract)

Design and Development Control System for Deep-Fertilization Variable Liquid Fertilizer Applicator (Abstract)

Design and Implementation of Fishery Forecasting System Based on Radial Basis Function Neural Network (Abstract)

Design and Implementation of the Accumulating Algorithm of Digital Signal Averager (Abstract)

Design and Realization of Testing and Analyzing Apparatus for Automobile Clutch (Abstract)

Design and Research of Virtual Assembly System Based on OSG (Abstract)

Design Method of Modular Units for Articulated in-Pipe Robot Inspecting System (Abstract)

Design of CMOS Image Sensor's Initialization Based on FPGA (Abstract)

Design of Intelligent Wheeled Robot Based on Multi-sensors (Abstract)

Design of the Control System for a Hexapod Walking Robot (Abstract)

Detection of Corn Plant Population and Row Spacing Using Computer Vision (Abstract)

Determine of Rubber Parameters of Finite Element Model (Abstract)

Development and Application of Economic Evaluation Software for Seafloor Massive Sulfide Deposits (Abstract)

Development of Analytical Software for Dynamic Microscopic Granule Based on C# (Abstract)

Development of the Multiple Power Detection and Faulty Isolation System for Mobile Robots (Abstract)

Digital Radioscopy (DR) and CT Testing Technology Research for Key Parts in Railway Rolling Stock (Abstract)

Dimensional Variation Analysis of Compliant Sheet Metal Assembly (Abstract)

Distributed Beamforming Design on Amplify and Forward Two-Way Relaying Channels (Abstract)

Distribution Characteristics of Low-Temperature and Freezing Damage of Featured Fruit Trees Based on GIS and Distance to Coastline in Fujian Province (Abstract)

Distribution Model Based on Active Service (Abstract)

Disturbance-Observed-Based-Control Design of the Drag-Free Satellite (Abstract)

Division Characteristics of Agricultural Climate Dry and Wet in Fujian Province Based on GIS (Abstract)

Double Inverted Pendulum Control Based on Three-loop PID and Improved BP Neural Network (Abstract)

Driving Intentions Identification Based on Continuous P-2D HMM (Abstract)

Dynamic Performance Simulation on Complex Hydraulic Press System (Abstract)

Dynamic Programming Algorithm Based Path Planning of the Multiple Robot System (Abstract)

Dynamic Simulation of Litchi Fruit Flexible Manipulator in Picking Process (Abstract)

Dynamic Weighing of the Application Based on Parameters Identification (Abstract)

Effect of Interphase Composite Spacer on Transmission Line Galloping Control (Abstract)

Effect of Six Fungicides against Botrytis Cinerea on Protected Cultivation Tomato (Abstract)

Effects of Air Flow Disturbance of Spool Valve on Vibration Control of Active Pneumatic Vibration Isolation System (Abstract)

Elasto-plastic Collapse Strength Calculation of Casing under Pure External Pressure (Abstract)

Enhanced Plasticity of Bulk MetalLic Glass Alloys (BMGs) by Internal Microstructural Modification (Abstract)

Epoxy Grout Repair Cracks in the Maintenance of the Bridge (Abstract)

Error Values of Measuring Real-Time Propellant Temperatures of One Rocket with Traditional Method (Abstract)

Experiment Research on Performance of Vehicle Diesel Engine with Spraying Vapor in Intake Manifold (Abstract)

Experimental Study for "Quasi-uniform Wearability" Treatment of Cylinder Liner Inner Surface (Abstract)

Experimental Study on a Thickness-Adjustable Absorber for Reverberation Controlling (Abstract)

Experimental Study on Low NOx Emission Using Blast Furnace Gas Reburning and Industrial Application in Stoker Boiler (Abstract)

Extracting Visual Saliency Based on Multi-scale Receptive Field Template (Abstract)

Fabrication of Micro Spherical Electrode by One Pulse Electrical Discharge Machining (Abstract)

Fast Mode Decision Based on All-Zero Block in H.264/AVC (Abstract)

Finite Element Analysis for the Equivalent Stress on Three-Dimensional Multi-asperity Coating (Abstract)

Finite Element Analysis of Crankshaft by ABAQUS (Abstract)

Forming of Surface Quality when Cutting Parts Using Ultrasound Liquid Flow (Abstract)

FTA at the Semi-automatic Machine for Implanting Nuts into Shells of Phones (Abstract)

Fundamental Study on Fiber Bragg Grating Network for High Speed Collisions Detection (Abstract)

Fuzzy PID Control for a Class of Distributed Parameter Systems (Abstract)

GIS-Based Assessment of Roof-Mounted Solar Energy Potential in Jiangsu, China (Abstract)

Harmonic and Inter-harmonic Signal Analysis Based on Hilbert-Huang Transform (Abstract)

Helical Intake Port Design and Experimental Analysis of Horizontal Diesel Engine (Abstract)

H-infinity Filter Design for Uncertain Markovian Jump Singular Stochastic Systems (Abstract)

High Speed Real-Time Data Acquisition System Based on Solid-State Storage Technique (Abstract)

Histogram-Preserving Steganography Using Maximum Flow Algorithms (Abstract)

Human Abnormal Action Identification Method in Different Scenarios (Abstract)

Hybrid PCA-SVM Method for Pattern Recognition of Chatter Gestation (Abstract)

Hydraulic Excavator Hybrid Power System Parameters Design (Abstract)

Ideas and Tactics for Achieving Sustainable Development of Local Agriculture (Abstract)

Image Deblurring Regularized by Wavelet Probability Shrink (Abstract)

Image Denoising Algorithm Using Neighbourhood Characteristics and Cycle Spinning (Abstract)

Implementation of the Multiple Tasks Allocation Problem for Mobile Robots (Abstract)

Improved FP-Growth Algorithm for Freeway Surveillance Network Intrusion Detection System (Abstract)

Improvement and AppLication of MKSVM (Abstract)

Incorporating Domain High-Level Concepts into Heuristic Searches: A Case Study on Identifying Plant Species in Remote Sensing Images (Abstract)

Induced Wheel-Based Study on Point Contact Kinematics Modeling for Ultra-Precision Grinding (Abstract)

Influence of Alq3:C545T on Luminescence of Blue LED (Abstract)

Initial Version of State Transition Algorithm (Abstract)

The Research on Engineering Machinery Products Form Innovation Design Based on TRIZ (Abstract)

Input-to-State Stability of Discrete-Time Switched Systems (Abstract)

Insulating Oil Level Monitoring System for Transformer Based on Liquid Level Sensor (Abstract)

Internet of Things-Based Positioning of Coalmine Personnel and Monitoring of Emergency State (Abstract)

Investigation and Development on Integrated Design of Engineering Clamp Hanger (Abstract)

Key Engineering and Programming Technology of High Speed Numerical Control Milling (Abstract)

Key Techniques Analysis on Surface Restructuring Based on Diffraction Grating Projection Photography (Abstract)

Key Techniques Research on a New Vehicular Speech Recognition System (Abstract)

Key Technology Research on the Flexible Welding Line for Multi-model Automobile (Abstract)

Kinematics Modeling and Real-Time Seam Tracking for Welding Mobile Robot (Abstract)

Large Sample Detection and Optimal Distribution Models of Vehicle Brake Performance (Abstract)

Link Performance Analysis for Ultrawide Bandwidth RFID (Abstract)

Liquid Flow Detection System Based on Wireless Sensor Network (Abstract)

Load Experiment of Prestressed Hollow Concrete Plank Using in Bridge (Abstract)

Logic Constitution of Mechatronic System (Abstract)

Long-term Capacity Planning with Multi-process Routing for Mould Enterprise (Abstract)

Machining and Installing the Four over Dowel Holes with Variables Before and After Installation Based on Parameter Programming (Abstract)

Mathematical Model and Simulation for Testing Aspheric Surface Using the Digital Moire Patterns by Sub-region Stitching Method (Abstract)

Measurement and Analysis on Emissions from an EFI Gasoline Engine under Transient Conditions (Abstract)

Mechanism Principle and Dynamics Simulation on Variable Diameter Walking Wheel (Abstract)

Model Based Comprehensive Functional Verification of RF SoC (Abstract)

Modeling and Simulation Analysis of NC Camshaft Grinding System (Abstract)

Modeling and Simulation of Dynamic Characteristics of a Bipropellant-Powered Hydraulic Free Piston Engine (Abstract)

Modeling of Hydraulic Controlled and Regulated Direct Method in the Cutter System of Shield Tunneling Machine (Abstract)

Modeling of Precision ReliabiLity for NC Machine Tool Based on Multi-body System Theory (Abstract)

Monitoring of Summer High Temperature Disaster of Rice by Using MODIS Data (Abstract)

Multi-Projection-Based Thousand-Arm Guanyin DOM (Abstract)

Networked Technical Services Oriented Production Process (Abstract)

Neural Network Adaptive Control of Piezoelectric Actuator in Scanning Tunneling Microscope (Abstract)

New Micro-displacement Feeding Mechanism for Hone Stones (Abstract)

Nonlinear Adaptive Control for Low Earth Orbit Formation Flying (Abstract)

Novel Adaptive Filter Method and Application in Broken Rotor Bar Fault Diagnosis of Induction Motor (Abstract)

Novel Sustainable Metal Removal by Biologically Produced Ferric Sulphate (Abstract)

Numerical Simulation of a Leakage Magnetic Flux for Permanent Magnet DC Motors (Abstract)

Numerical Simulation of Blasting Demolition of 16-Storied Structure (Abstract)

On Income Increasing Situation's Analysis and Countermeasure of Local Farmers - To Take Xuchang City for Instance (Abstract)

On Modeling and the Interface Technology of the Reduction Device Based on Pro / E and ADAMS (Abstract)

On the Construction of Pre-tensioned Hollow Beams (Abstract)

On the Research of Pig Individual Identification and Automatic Weight Collecting System (Abstract)

Optimal Design and Analysis on Pricking Hole Mechanism with Planetary Elliptic Gears for Deep-Fertilization Liquid Fertilizer Applicator (Abstract)

Optimal Design of Bridge Polarizing Relay (Abstract)

Optimization of Image Mosaic Algorithm for Large Workpiece Based on Multi-scale and Multi-resolution Search Strategy (Abstract)

Optimization of the Titania Humidity Sensor Equivalent Circuit Model Based on Genetic Algorithms (Abstract)

Optimizing Design of Four-Wheel Steering Vehicle Steering Trapezoid Based on MATLAB (Abstract)

Optimum Method of Magneto-rheological Damper Design (Abstract)

Outage Performance of Cognitive Relay Networks Using Interweave-Underlay Approach (Abstract)

Overall Scheme and Structural Design of Bolts Automatic Typewriter (Abstract)

Parametric Analysis of New Tamping Device Based on the Mathematic Modeling (Abstract)

Partial Nitrification Regulated by Basicity in Low C/N Ratio Wastewater (Abstract)

Phase-Separation Floatation Spectrophotometric Determination of Trace Chlortetracycline in River (Abstract)

Physical and Mechanical Characteristics of Soft Soil in Lower Reaches of Yangtze River (Abstract)

Polarization-Space-Time Adaptive Processing for Clutter Suppression in Airborne Radar Systems (Abstract)

Pollution Characteristics of Heavy Metal in the PM10 of Nanchang City (Abstract)

Preparation and Properties of Novel Sulfonated Poly (phenylene arylene) (SPA) Membranes for Fuel Cell Applications (Abstract)

Principle and Analysis for the Novel Radial Translational Meshing Gear Motor (Abstract)

Processing Parameter Optimization for Injection Molding Products Based on Orthogonal Experimenter and Analysis (Abstract)

Realization of Modified MPC Algorithm Based on Real Time Operating System (Abstract)

Real-Time Measuring the Distance between Laser's Mouth and Workpiece (Abstract)

Real-Time Monitoring System of PLC for Production Line of Coin Cell Battery Based on LabVIEW (Abstract)

Real-Time On-Road Vehicle Detection Combining Specific Shadow Segmentation and SVM Classification (Abstract)

Recognition Algorithm of Laser Echo Signal in Tuyere Raceway Based on Multiwavelet Denoising and ICA (Abstract)

Remote Sensing and GIS Application for Agricultural Land Quality Assessment of Yulin Prefecture (Abstract)

Research and Analyze on Belt-conveyors of Purely Mechanical Belt-broken Seizing Machine (Abstract)

Research and Application of Hausdorff Metric Based i-v Vague Clustering Method (Abstract)

Research and Application of Virtual Real-Time Monitoring System of Well Testing Truck (Abstract)

Research and Design of Assembly Manufacturing Execution System for Aero-engine (Abstract)

Research and Design of Network Ordering Tickets Mobile Payment Protocol (Abstract)

Research and Development of CAPP and Quality Control Integrated System (Abstract)

Research for Digital Automatic Test Technology of Hollow Axle in Motor Train Unit (Abstract)

Research of Direct Torque Control System within Full-speed Regions (Abstract)

Research of Intelligent Gas Perception Instrument Based on NDIR and RF Communication Technology (Abstract)

Research of Military Logistics Management Information System Based on the Integrated Technology of Workflow and GIS (Abstract)

Research of Scheduling Algorithm Based on Priority in Data Nodes of Cloud Storage (Abstract)

Research on Active Synchronous Control System of Hydraulic Press and Its Reliability Analysis (Abstract)

Research on an Intelligence Q/A Expert System Based on the Bayesian Reasoning Mechanism (Abstract)

Research on BP-PID Controller for the Motion Synch Recording and Simulation (Abstract)

Research on Data Acquisition and Analysis of Circular Tests on Numerical Control Machine Tools Based on NC System (Abstract)

Research on Fault Location of Power Cable with Wavelet Analysis (Abstract)

Research on Faults Diagnostic Technology of Hydraulic System Based on Parameters Measurement (Abstract)

Research on Feed System of Phi630 Steel Pipe Chamfering Machine (Abstract)

Research on Hydrology Time Series Prediction Based on Grey Theory and epsilon-Support Vector Regression (Abstract)

Research on Index Portfolio Optimized Replication Model Based on Liquidity Penalty Factor (Abstract)

Research on Metal Magnetic Memory Testing Technology in Welding Joint of Structure Train (Railway High-Speed Motor Train Set) Locomotive (Abstract)

Research on Milling Globoidal Indexing Cam Based on Pro / NC (Abstract)

Research on Modeling for YiLiuShi NeutraLization Reaction Process (Abstract)

Research on Numerical Simulation of High Temperature Heat Pipe (Abstract)

Research on OPC UA Based on FDT/DTM and EDDL (Abstract)

Research on Potential Energy Recovery of 16T Wheeled Hybrid Excavator (Abstract)

Research on Random Noise Attenuation in Transform Domain (Abstract)

Research on Recycling of Numerical Control Machine Tools (Abstract)

Research on Rigidity of the Giant Forging Hydraulic Press on the Impact of Synchronization Performance (Abstract)

Research on Small Unmanned Four-rotor Control Based on AIC (Abstract)

Research on Soft Switching Boost Converter (Abstract)

Research on Spindle Bearings State Recognition of CNC Milling Machine Based on Noise Monitoring (Abstract)

Research on Template-Based Parameterized Structure Design for Drawing Dies (Abstract)

Research on the Applicability of Solar Energy-Ground Source Heat Pump in Different Regions of China (Abstract)

Research on the Emotion Recognition Based on the Fuzzy Neural Network in the Intelligence Education System (Abstract)

Research on the Load Characteristics of Permanent Magnet Synchronous Motor (Abstract)

Research on the Probability of Joint Investment Based on Logistic Regression Analysis (Abstract)

Research on the Yield Formation Characteristics of Zheng-Wheat 7698 under the Super-High Yield Condition (Abstract)

Research on Universal NC Program Processor for CNC System (Abstract)

Research on Vibration and Lever-Arm Effect Influence to Onboard SAR Centre Motion Parameters (Abstract)

Returns Acquiring and HRRP Imaging for Radar Ship Target Recognition (Abstract)

Road Signal Intersection Congestion Mechanism Analysis (Abstract)

Robot Navigation Based on Multi-sensor Data Fusion (Abstract)

Root-Soil System Domain Knowledge Constructing Method Based on Relational Analysis of Single Impact Factor (Abstract)

Scene Classification Combining Low-level and Semantic Modeling Strategies (Abstract)

Second-Order Siding Mode Control with Fuzzy Compensator for a Magnetic Levitation System (Abstract)

Separation of Cortical Arteries and Veins Using Intrinsic Optical Signals Extracted by Canonical Correlation Analysis (Abstract)

Silicon Content and Isothermal Quenching Process' Influence on High Silicon Cast Steel Organization and Performance (Abstract)

Simulation and Experimental on Valve-less Piezoelectric Pump with Hackle Chamber (Abstract)

Size Effect of Element in Structural Blasting Demolition (Abstract)

Size Measurement Based on Structured Light Sensor (Abstract)

SMA-13 Target Mix Design (Abstract)

Small Satellite Magnetism Control for Velocity Damping (Abstract)

Sound Investigation and Protection of Sound for Vocal Workers in Quake-Hit Areas (Abstract)

Stiffness Analysis of a Building Drum Linkage Mechanism (Abstract)

Strain Response Frequency Function-Based Mechanical Damage Indentification by Fiber Bragg Grating Sensors (Abstract)

Structural Analysis of Size of Machine Vision Measuring System Based on Structured Light and Its Experimental Study (Abstract)

Structural Design for Lightweight Off-Axis TMA Space Telescope (Abstract)

Study of Long-Distance Real-Time Data Transmission Technology Based on Web (Abstract)

Study of Online Automative Detection Based on the Vibration Signal of Dual-Processor (Abstract)

Study of Singers' Physiology and Part Determination in Concerted Music (Abstract)

Study of the Prestack Elastic Parameter Inversion Based on Immune Genetic Algorithm (Abstract)

Study on CAD for the Complex Combustion Structure in Engine Based on PRO/E (Abstract)

Study on Condensation Control of Radiant Cooling Ceiling (Abstract)

Study on Energy Consumption Status and Development Strategy of Metropolis in China: A Case Study of Shanghai (Abstract)

Study on Environment Impact Assessment of Land Development and Consolidation Planning (Abstract)

Study on Identification Method of Tool Wear Based on Singular Spectrum Analysis and Support Vector Machine (Abstract)

Study on Realization of Dynamic Interaction with CAD Complex Model in Virtual Reality System (Abstract)

Study on the Improved A2/O Process Used in Swine Wastewater Treatment (Abstract)

Study on the Laser Micro-manufacturing Equipment of Special Micro-manufacturing Technology (Abstract)

Study on the Processing Methods of Aluminum Foil Measurement Signals for Ultrasonic Cleaning Parameters (Abstract)

Study on the Stress Distribution of Grinding Wheel Based on ANSYS under Multi-operating Modes (Abstract)

Sub-optimal Linear Beamforming Design on MIMO Two-Way Relay Channels (Abstract)

Synthesis of Combined Geneva Mechanism with Cycloid Crank (Abstract)

The Application and Research of a Simulation-Based Line Balancing Method (Abstract)

The Application of BP Neural Network in the Fault Diagnosis of Rotating Machinery (Abstract)

The Application of Cloud Computing SaaS Delivery Model in University Talents Training (Abstract)

The Application of Fuzzy System Group in Intelligent Diagnosis for Power Tranformer (Abstract)

The Application of Informatization in the Fast and Accurate Cost Accounting Process of Machinery Manufacturing Industry (Abstract)

The Application of PLC to CNC Machine Tools Development (Abstract)

The Bio-remediation Technology of Organophosphorus Pesticides Contaminated Soil (Abstract)

The Break Failure Analysis of the 65Mn Chain Mat (Abstract)

The Calibration Algorithm of Energy Detection and Site Meter (Abstract)

The CMM Measurement Path Planning for Blade Surface Based on the Contour Measurement (Abstract)

The Construction Control Craft of Guardrail Panel of Precast Concrete (Abstract)

The Cooling Principle of High Temperature Exchange Machinery System with Plenty of Cold Source (Abstract)

The Data Processing System of CNC Wood-Working Milling Machine (Abstract)

The Design and Calculation of Tension-Length Integrated Sensor of Winch Cable (Abstract)

The Design and Realization of the Fault Diagnosis Expert System of CNC (Abstract)

The Design of Dissolved Oxygen Detection System Based on C8051F020 (Abstract)

The Design of Embedded IPV4 \ IPV6 Protocol Converter Based on ARM9 (Abstract)

The Design of Master Control System Based on SIP Protocol (Abstract)

The Discussion of Spur Gear Library System Based on UG/Open (Abstract)

The Effect and Development Strategies of Digital Agriculture during New Countryside Construction (Abstract)

The Effect of Biomass Components on the Co-combustion Characteristics of Biomass with Coal (Abstract)

The Effect of Processing Parameters on Performance of Laser Welding Tailored Blanks of Different Thickness (Abstract)

The Electrical Parameters Design of EAF Voltage Fluctuation Suppression (Abstract)

The Imbalance Source of Spindle-Tool System and Influence to Machine Vibration Characteristics (Abstract)

The Iterative Learning Control System for 600MW Unit Milling System (Abstract)

The Kinematic Analysis and Parametric Design of Beam Pumping Unit Based on ADAMS (Abstract)

The MultiAgent Stress Analysis and Design of Rectangular Tube Forming (Abstract)

The Node Localization Research of the Underground Wireless Sensor Networks Based on DV-Hop and Ant Colony Optimization (Abstract)

The Performance Study about the Boronitriding Layer in the Low Temperature (Abstract)

The Research and Realization of Algorithms for Guillotine Rectangle Cutting Stock Problem (Abstract)

The Research on Cable Broken Wires Inspection for a Cable Stayed Bridge by Discrete Wavelet Transformation (Abstract)

The Research on Detection Method of Battery Discharge (Abstract)

The Simulation Analysis of Magnetic Circuit of Contactless Power Transfer System Based on ANSYS (Abstract)

The Static and Dynamic Analysis of High-speed Electric Spindle Based on ANSYS (Abstract)