The Community for Technology Leaders
2014 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR) (2014)
Cluj-Napoca, Romania
May 22, 2014 to May 24, 2014
ISBN: 978-1-4799-3731-8
TABLE OF CONTENTS

Cover page (PDF)

pp. 1

Title page (PDF)

pp. 1

Copyright page (PDF)

pp. II

General chairs (PDF)

pp. III

Blank page (PDF)

pp. 1

Foreword (PDF)

pp. VII

Contents (PDF)

pp. XI-XVII

Blank page (PDF)

pp. 1

Blank page (PDF)

pp. 1

An LMI approach for observer design for Takagi-Sugeno descriptor models (Abstract)

Victor Estrada-Manzo , LAMIH UMR CNRS 8201, University of Valenciennes and Hainaut-Cambrésis, Le Mont Houy, 59300, Valenciennes, France
Thierry Marie Guerra , LAMIH UMR CNRS 8201, University of Valenciennes and Hainaut-Cambrésis, Le Mont Houy, 59300, Valenciennes, France
Zsofia Lendek , Department of Automation Technical University of Cluj-Napoca, Memorandumului 28, 400114, Cluj-Napoca, Romania
pp. 1-5

Fault-tolerant predictive control for Markov Linear Systems (Abstract)

Manuel A. Hernandez-Mejias , Dept. Ing. Sistemas y Automatica, DISA, Universitat Politecnica de Valencia, Cno Vera s/n, E-46022 Valencia (Spain)
Carlos Arino , Dept. de Sistemas Industriales y Diseño, Universitat Jaume I, Av. Vicent Sos Baynat, s/n E-12071 Castellón (Spain)
Antonio Sala , Instituto de Automática e Informática Industrial, AI2, Universitat Politecnica de Valencia, Cno Vera s/n, E-46022 Valencia (Spain)
Andres Querol , Instituto de Automática e Informática Industrial, AI2, Universitat Politecnica de Valencia, Cno Vera s/n, E-46022 Valencia (Spain)
pp. 1-6

Synthesis of train traffic control system with evolutionary computing (Abstract)

Attila Ors Kilyen , Technical University of Cluj-Napoca, Faculty of Automation and Computer Science, Romania
Mihai Hulea , Technical University of Cluj-Napoca, Faculty of Automation and Computer Science, Romania
Tiberiu S. Letia , Technical University of Cluj-Napoca, Faculty of Automation and Computer Science, Romania
pp. 1-6

Optimistic planning with long sequences of identical actions for near-optimal nonlinear control (Abstract)

Koppany Mathe , Department of Automation, Technical University of Cluj-Napoca, Memorandumului 28, 400114 Cluj-Napoca, Romania
Lucian Busoniu , Department of Automation, Technical University of Cluj-Napoca, Memorandumului 28, 400114 Cluj-Napoca, Romania
Liviu Miclea , Department of Automation, Technical University of Cluj-Napoca, Memorandumului 28, 400114 Cluj-Napoca, Romania
pp. 1-6

Internal model control for a hydraulically driven robotic arm (Abstract)

Clitan Iulia , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Ionut Muntean , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

Linear quadratic optimal control of an inverted pendulum using the artificial bee colony algorithm (Abstract)

Baris Ata , Department of Computer Engineering, Cukurova University, Adana, Turkey
Ramazan Coban , Department of Computer Engineering, Cukurova University, Adana, Turkey
pp. 1-4

Digitization of continuous interval transfer functions: A revisited method and its application on a case study (Abstract)

Ionut Muntean , Process and Energy Systems Engineering, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Iulia Clitan , Process and Energy Systems Engineering, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-4

Fuzzy-based gain scheduling of Exact FeedForward Linearization control and sliding mode control for magnetic ball levitation system: A comparative study (Abstract)

Manar Lashin , Mechatronics and Robotics Eng. Dept., Egypt-Japan University of Science and Technology, E-JUST- Alexandria, Egypt
Abdullah T. Elgammal , Mechatronics and Robotics Eng. Dept., Egypt-Japan University of Science and Technology, E-JUST- Alexandria, Egypt
Ahmed Ramadan , Computers and Automatic Control Dept., Faculty of Eng., Tanta University, Egypt
A. A. Abouelsoud , Electronics and Communication Eng. Dept., Faculty of Eng., Cairo University, Egypt
Samy F. M. Assal , Production Eng. and Mechanical Design Dep., Faculty of Eng., Tanta University, Egypt
A. Abo-Ismail , Mechatronics and Robotics Eng. Dept., Egypt-Japan University of Science and Technology, E-JUST- Alexandria, Egypt
pp. 1-6

EPSAC versus PID control of neuromuscular blockade (Abstract)

Ramona Hodrea , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Ioana Nascu , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Ioan Nascu , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Robin De Keyser , Department of Electrical energy, Systems and Automation, Ghent University, Ghent, Belgium
Horatiu Vasian , University of Medicine and Pharmacy “Iuliu Hatieganu”, Department of Anaesthesia and Intensive Care, Cluj-Napoca
pp. 1-6

Adaptive fuzzy iterative learning controller for X-Y table position control (Abstract)

Osama Elshazly , Industrial Electronics and Control Engineering Department, Faculty of Electronic Engineering Menouf, Menoufiya University, Egypt
Mohammad El-bardini , Industrial Electronics and Control Engineering Department, Faculty of Electronic Engineering Menouf, Menoufiya University, Egypt
Nabila M. El-Rabaie , Industrial Electronics and Control Engineering Department, Faculty of Electronic Engineering Menouf, Menoufiya University, Egypt
pp. 1-6

Process modeling and simulation of distributed parameter using (Mpdx) method with approximating solutions (Abstract)

Diana Monica Sas , Department of Automation, Technical University of Cluj-Napoca, Faculty of Automation and Computer Science, 26-28 Gh. Baritiu Street, 400027 Cluj-Napoca, Romania
Mihaela-Ligia Unguresan , Department of Physics and Chemistry, Technical University of Cluj-Napoca, Faculty of Materials Science and Engineering, 103-105 Muncii Street, 400641 Cluj-Napoca, Romania
Tiberiu Colosi , Department of Automation, Technical University of Cluj-Napoca, Faculty of Automation and Computer Science, 26-28 Gh. Baritiu Street, 400027 Cluj-Napoca, Romania
Mihai Secara , Department of Automation, Technical University of Cluj-Napoca, Faculty of Automation and Computer Science, 26-28 Gh. Baritiu Street, 400027 Cluj-Napoca, Romania
pp. 1-6

E-health decision support system for differential diagnosis (Abstract)

Roxana Cucu , Katholieke Universiteit Leuven - Campus Brussels, Brussels, Belgium
Camelia Avram , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca Cluj-Napoca, Romania
Adina Astilean , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca Cluj-Napoca, Romania
Ionuc-Gabriel Farcas , Technische Universität München, Munich, Germany
Jose Machado , Mechanical Engineering Department, University of Minho, Campus of Azurém, 4800-058 Guimarães, Portugal
pp. 1-6

From product specification to manufacturing control (Abstract)

L. Mic , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
R. Fat , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
M. M. Santa , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
T. S. Letia , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Blank page (PDF)

pp. 1

A new text clustering method based on Huffman encoding algorithm (Abstract)

Maria Muntean , Science and Engineering Department, “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, Romania
Lucia Cabulea , Science and Engineering Department, “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, Romania
Honoriu Vslean , Automation Department, Technical University of Cluj Napoca, Cluj Napoca, Romania
pp. 1-6

Experimental testing of BaPaMAN 1 with a high speed motion analysis system (Abstract)

Giuseppe Carbone , LARM- Laboratory of Robotics and Mechatronics, University of Cassino and South Latium, Cassino, Italy
Cristian Copilusi , Applied Mechanics Department, Faculty of Mechanics, University of Craiova, Craiova, Romania
pp. 1-6

Spam host classification using PSO-SVM (Abstract)

Adriana-Cristina Enache , Politehnica University, Faculty of Automatic Control and Computer Science, Bucharest, Romania
Valentin Sgarciu , Politehnica University, Faculty of Automatic Control and Computer Science, Bucharest, Romania
pp. 1-5

Monitoring and controlling of smart equipments using Android compatible devices towards IoT applications and services in manufacturing industry (Abstract)

Mircea Murar , Design Engineering and Robotics Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Stelian Brad , Design Engineering and Robotics Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

Multi-agent system with hierarchical private key (Abstract)

Stelian Flonta , Automation Department, Technical University of Cluj-Napoca, Romania
Laura Vegh , Automation Department, Technical University of Cluj-Napoca, Romania
Liviu Cristian Miclea , Automation Department, Technical University of Cluj-Napoca, Romania
Iulia Stefan , Automation Department, Technical University of Cluj-Napoca, Romania
Szilard Enyedi , Automation Department, Technical University of Cluj-Napoca, Romania
pp. 1-4

Cyber physical systems in the context of Industry 4.0 (Abstract)

N. Jazdi , Institute of Industrial Automation and Software Engineering, University of Stuttgart, Stuttgart, Germany
pp. 1-4

Grouping strategy using Enneagram typologies (Abstract)

Mircea-Florin Vaida , Communication Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Petre G. Pop , Communication Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Enhancing security in cyber-physical systems through cryptographic and steganographic techniques (Abstract)

Laura Vegh , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Romania
Liviu Miclea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Romania
pp. 1-6

WaterfallTree — External indexing data structure (Abstract)

Iliya Tronkov , Technical University - Gabrovo, Technical Director at STS Soft SC
pp. 1-6

Data scrambling in memories: A security measure (Abstract)

Madalin-Ioan Neagu , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Liviu Miclea , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

A redundant solution for collective residences inflammable gas leaking monitoring using ultra-low power transmission system and automatic control (Abstract)

Mircea Risteiu , Computer Science and Engineering Department, “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, Romania
Ioan Ileana , Computer Science and Engineering Department, “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, Romania
Maria Muntean , Computer Science and Engineering Department, “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, Romania
Gheorghe Marc , Computer Science and Engineering Department, “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, Romania
pp. 1-6

Model based fault detection for electrical drives with BLDC motor (Abstract)

P. Dobra , Automation Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
M. Dobra , Automation Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
D. Moga , Automation Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
V. I. Sita , Automation Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
Petru Dobra , Electrical Measurements Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
Mirela Trusca , Electrical Measurements Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
Daniel Moga , Electrical Measurements Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
R. A. Munteanu , Electrical Measurements Dept., TU of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

Current-mode log-domain programmable gain amplifier (Abstract)

Robert Groza , Bases of Electronics Department, Faculty of Electronics, Telecommunications and Information Technology, Technical University of Cluj-Napoca, Romania
Mihaela Cirlugea , Bases of Electronics Department, Faculty of Electronics, Telecommunications and Information Technology, Technical University of Cluj-Napoca, Romania
pp. 1-4

Analysis of architectures for audio-video services distribution in hybrid IPTV/DVB-C networks (Abstract)

Radu Arsinte , Communications Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Eugen Lupu , Communications Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Advanced human-computer interaction in external resource annotation (Abstract)

Roxana Moldovan , Communications Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Bogdan Orza , Communications Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Aurel Vlaicu , Communications Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Cosmin Porumb , HyperMedia SRL, Cluj-Napoca, Romania
pp. 1-6

Cryptographic key issues and solutions for the bit sieve/pixel-sieve method (Abstract)

Incze Arpad , Faculty of Engineering and Science, “1 Decembrie 1918” University of Alba Iulia, Romania
pp. 1-5

Fast creation of short-living virtual machines using copy-on-write RAM-disks (Abstract)

Adrian Colesa , Technical University of Cluj-Napoca, Computer Science Department, Tudor Bura, Adrian Pop, Sándor Lukács Bitdefender
pp. 1-6

Testing digital circuits using a Mixed-Signal Automatic Test Equipment (Abstract)

Mihaela Radu , Farmingdale State College, State University of New York, Farmingdale, USA
pp. 1-4

Function oriented concept development of a mobile platform for motion studyes (Abstract)

Mihai Steopan , Dep. Of Industrial Design and Robotics, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Virgil Ispas , Dep. Of Industrial Design and Robotics, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Sergiu Negrean , Department of Design, S.C. INOTECH S.R.L
pp. 1-6

A white-box tool to set performance targets in software engineering management using the ISBSG repository (Abstract)

Vasile Stroian , École de technologie supérieure - Université du Québec (Canada)
Pierre Bourque , École de technologie supérieure - Université du Québec (Canada)
Alain Abran , École de technologie supérieure - Université du Québec (Canada)
pp. 1-6

The implemenation of process capability: A case study in a wood industry company (Abstract)

Cristina Ile , Technical University, Cluj-Napoca, Romania
pp. 1-5

Automation system based on SIMATIC S7 300 PLC, for a hydro power plant (Abstract)

R. Butuza , Department of Automation, Technical University of Cluj-Napoca, G. Bariţiu 26-28, 400027, Cluj-Napoca, Romania
I. Nascu , Department of Automation, Technical University of Cluj-Napoca, G. Bariţiu 26-28, 400027, Cluj-Napoca, Romania
O. Giurgioiu , Department of Automation, Technical University of Cluj-Napoca, G. Bariţiu 26-28, 400027, Cluj-Napoca, Romania
R. Crisan , Department of Automation, Technical University of Cluj-Napoca, G. Bariţiu 26-28, 400027, Cluj-Napoca, Romania
pp. 1-6

“Chirp” signal generators for frequency response experiments (Abstract)

M. Gretinger , Department of Automation, Technical University of Cluj-Napoca, 400114 Cluj-Napoca
M. Secara , Department of Automation, Technical University of Cluj-Napoca, 400114 Cluj-Napoca
Cl. Festila , Department of Automation, Technical University of Cluj-Napoca, 400114 Cluj-Napoca
Eva H. Dulf , Department of Automation, Technical University of Cluj-Napoca, 400114 Cluj-Napoca
pp. 1-4

Assisted test case design using contextual information by DOM exploration (Abstract)

Iulia Stefan , Automation Department, Technical University of Cluj-Napoca, Romania
Ioan Ivan , Automation Department, Technical University of Cluj-Napoca, Romania
Liviu Miclea , Automation Department, Technical University of Cluj-Napoca, Romania
pp. 1-4

Criteria for the localization of the monophase fault in medium voltage industrial networks with an isolated neutral (Abstract)

Romeo Ormenisan , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-4

Road traffic safety solution (Abstract)

Ovidiu Stan , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Liviu Miclea , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

The characteristic sizes of the monophase fault from the industrial networks of medium voltage, in a stabilized regime (Abstract)

Romeo Ormenisan , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-4

Speeding-up polynomial multiplication on Virtex FPGAs: Finding the best addition method (Abstract)

Vlad-Cristian Miclea , INRIA, Universite de Lyon, INSA-Lyon, CITI-INRIA, F-69621, Villeurbanne, France
pp. 1-5

Robotics (PDF)

pp. 1

Blank page (PDF)

pp. 1

Genetic nonlinear controller of a skid steering mobile robot with slip conditions (Abstract)

Osama Elshazly , Mechatronics and Robotics Eng. Dept., Egypt-Japan University of Science and Technology, E-JUST- Alexandria, Egypt
Zakarya Zyada , Mechatronics and Robotics Eng. Dept., Egypt-Japan University of Science and Technology, E-JUST- Alexandria, Egypt
Ahmed Abo-Ismail , Mechatronics and Robotics Eng. Dept., Egypt-Japan University of Science and Technology, E-JUST- Alexandria, Egypt
pp. 1-6

Design and development of an autonomous omni-directional mobile robot with Mecanum wheels (Abstract)

Mihai Olimpiu Tatar , Department of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, Cluj-Napoca, România
Catalin Popovici , Department of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, Cluj-Napoca, România
Dan Mandru , Department of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, Cluj-Napoca, România
Ioan Ardelean , Department of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, Cluj-Napoca, România
Alin Plesa , Department of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, Cluj-Napoca, România
pp. 1-6

Railway track following with the AR.Drone using vanishing point detection (Abstract)

Elod Pall , Dept. of Autom., Tech. Univ. of Cluj-Napoca, Cluj-Napoca, Romania
Koppany Mathe , Dept. of Autom., Tech. Univ. of Cluj-Napoca, Cluj-Napoca, Romania
Levente Tamas , Dept. of Autom., Tech. Univ. of Cluj-Napoca, Cluj-Napoca, Romania
Lucian Busoniu , Dept. of Autom., Tech. Univ. of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Presentation of the mixt control unit for PARMIS parallel robotic system (Abstract)

B. Gyurka , IPA R&D Institute for Automation, Cluj Subsidiary, Cluj-Napoca, Romania
I. Kovacs , IPA R&D Institute for Automation, Cluj Subsidiary, Cluj-Napoca, Romania
D. Pisla , Technical University of Cluj-Napoca, Romania
pp. 1-6

Aspects concerning development of reconfigurable driving simulators (Abstract)

C. Brisan , Dept. of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
C. Lapusan , Dept. of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
V. Chiroiu , Institute of Solid Mechanics, Romanian Academy Bucharest, Romania
L. Munteanu , Institute of Solid Mechanics, Romanian Academy Bucharest, Romania
D. Dumitriu , Institute of Solid Mechanics, Romanian Academy Bucharest, Romania
pp. 1-6

Design and control system of a parallel robot for brachytherapy (Abstract)

B. Galdau , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
N. Plitea , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
C. Vaida , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
F. Covaciu , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
D. Pisla , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Applications (PDF)

pp. 1

Blank page (PDF)

pp. 1

eHealth solutions in the context of Internet of Things (Abstract)

Gheorghe Sebestyen , Department of Computers, Technical University of Cluj-Napoca, Romania
Anca Hangan , Department of Computers, Technical University of Cluj-Napoca, Romania
Stefan Oniga , Department of Informatics, University of Debrecen, Hungary
Zoltan Gal , Department of Informatics, University of Debrecen, Hungary
pp. 1-6

Data logger for humidity and temperature measurement based on a programmable SoC (Abstract)

Silviu Folea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
George Mois , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Mihai Hulea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Liviu Miclea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Vio Biscu , SYNCHRO COMP, Craiova, Romania
pp. 1-4

Industrial application of micro geometrical cutting edge optimization for solid carbide boring tools (Abstract)

Tofana Vasile Gabriel , Technical University of Cluj Napoca-Romania, Manufacturing Engineering Dep., Blvd. Muncii, No. 103-105, 400641, Cluj Napoca, Romania, S.C. Gühring S.R.L., Cluj Napoca, Romania
Marcel Sabin Popa , Technical University of Cluj Napoca-Romania, Manufacturing Engineering Dep., Blvd. Muncii, No. 103-105, 400641, Cluj Napoca, Romania
Stefan Sattel , Gühring oHG, Head of Research and Development Department, Winterlingen Street, No. 12, 72488, Sigmaringen-Laiz, Germany
Marius Bogdan Bozga , Technical University of Cluj Napoca-Romania, Manufacturing Engineering Dep., Blvd. Muncii, No. 103-105, 400641, Cluj Napoca, Romania
pp. 1-6

Hardware virtualization based security solution for embedded systems (Abstract)

Sandor Lukacs , Bitdefender, Cluj-Napoca, Romania
Andrei V. Lutas , Bitdefender, Cluj-Napoca, Romania
Dan H. Lutas , Bitdefender, Cluj-Napoca, Romania
Gheorghe Sebestyen , Technical University, Cluj-Napoca, Romania
pp. 1-6

Exploiting word meaning for negation identification in electronic health records (Abstract)

Ioana Barbantan , Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Rodica Potolea , Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-7

Hierarchical railway traffic model for information systems (Abstract)

G. I. Daian , Department of Automation, Technical University of Cluj-Napoca, (UTCN), Cluj-Napoca, Romania
M. M. Santa , Department of Automation, Technical University of Cluj-Napoca, (UTCN), Cluj-Napoca, Romania
T. S. Letia , Department of Automation, Technical University of Cluj-Napoca, (UTCN), Cluj-Napoca, Romania
pp. 1-6

Identifying patterns for human activities of daily living in smart homes (Abstract)

Radu Prodan , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Ioan Nascu , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

Environmental parameters control in Datacenter (Abstract)

M. R. C. Trusca , Datacenter Department, INCDTIM Cluj-Napoca, Romania
S. Albert , Datacenter Department, INCDTIM Cluj-Napoca, Romania
M. L. Soran , Datacenter Department, INCDTIM Cluj-Napoca, Romania
M. Abrudean , Department of Automatic, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-4

Diseased tissue area detection and delimitation, by fusion between finite difference methods and textural analysis (Abstract)

A. I. Mitrea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
S. Nedevschi , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
D. Mitrea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
P. Mitrea , Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
R. Badea , Department of Ultrasonography, University of Medicine and Pharmacy “I. Hatieganu”, Cluj-Napoca, Romania
pp. 1-5

Analog to digital front-end board ADVW, for vibrating wire sensor nodes, used in hydrotechnical structures monitoring sensor networks (Abstract)

Kovacs Istvan , S.C. IPA S.A., Cluj Subsidiary, Cluj-Napoca, Romania
Mircea Maria , S.C. IPA S.A., Cluj Subsidiary, Cluj-Napoca, Romania
Gyura Bela , S.C. IPA S.A., Cluj Subsidiary, Cluj-Napoca, Romania
pp. 1-4

Tibio-tarsal joint biomechanics analisys through Finite Element Modeling: A static loading model of the human tibio-tarsal joint (Abstract)

Tofan Doru-Alexandru , Orthopaedics and Traumatology Clinic, Clinical Emergency Hospital, Cluj-Napoca, Romania
Tomoaia Gheorghe , Orthopaedics and Traumatology Clinic, Clinical Emergency Hospital, University of Medicine and Pharmacy “Iuliu Hatieganu”, Cluj-Napoca, Romania
pp. 1-4

Remote data and video acquisition using lego mindstorms NXT and Linux based USB enabled router (Abstract)

Vasile Tompa , Design Engineering and Robotics, Department, Faculty of Machine Building, Technical University of Cluj-Napoca, Romania
Dan Hurgoiu , Design Engineering and Robotics, Department, Faculty of Machine Building, Technical University of Cluj-Napoca, Romania
pp. 1-5

Development of an avatar for a vehicle with independent suspensions (Abstract)

C. Lapusan , Dept. of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
V. Chiroiu , Institute of Solid Mechanics, Romanian Academy Bucharest, Romania
L. Munteanu , Institute of Solid Mechanics, Romanian Academy Bucharest, Romania
L. Bara , Dept. of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
C. Brisan , Dept. of Mechatronics and Machine Dynamics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
pp. 1-6

Fluid Stochastic Petri Nets based Modelling and simulation of Micro Hydro Power stations behaviour (Abstract)

Camelia Avram , Automation dept., Technical University of Cluj Napoca, Cluj-Napoca, Romania
Dan Mircescu , Automation dept., Technical University of Cluj Napoca, Cluj-Napoca, Romania
Adina Astilean , Automation dept., Technical University of Cluj Napoca, Cluj-Napoca, Romania
Ovidiu Ghiran , S.C. IPA S.A. Cluj, Cluj-Napoca, Romania
pp. 1-6

3D printing bone models extracted from medical imaging data (Abstract)

A. T. Popescu , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
O. Stan , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
L. Miclea , Department of Automation, Faculty of Automation and Computer Science, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

Microcontroller-based multiple-platform PWM signal generation procedures for industrial use (Abstract)

Bogdan Croitoru , Department of "Precise and Engineering Sciences", “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, ALBA County, Romania
Adrian Tulbure , Department of "Precise and Engineering Sciences", “1 Decembrie 1918” University of Alba Iulia, Alba Iulia, ALBA County, Romania
Mihail Abrudean , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, CLUJ County, Romania
pp. 1-6

Blank page (PDF)

pp. 1

Blank page (PDF)

pp. 1

Blank page (PDF)

pp. 1

Multi-agent system for heterarchical product-driven manufacturing (Abstract)

Octavian Morariu , University “Politehnica” Bucharest
Silviu Raileanu , University “Politehnica” Bucharest
Cristina Morariu , University “Politehnica” Bucharest
Theodor Borangiu , University “Politehnica” Bucharest
pp. 1-6

ILOG-based mixed planning and scheduling system for job-shop manufacturing (Abstract)

Silviu Raileanu , Department of Automation and Industrial Informatics, University Politehnica of Bucharest, Bucharest, Romania
Theodor Borangiu , Department of Automation and Industrial Informatics, University Politehnica of Bucharest, Bucharest, Romania
Octavian Morariu , Department of Automation and Industrial Informatics, University Politehnica of Bucharest, Bucharest, Romania
Octavian Stocklosa , East Electric Bucharest, Romania
pp. 1-6

Intelligent open architecture solutions for holonic manufacturing execution systems: Domain « key technologies for manufacturing» perspective (Abstract)

Gabriela Varvara , Department of Automatic Control and Applied Informatics, Technical University “Gheorghe Asachi”, Iaşi, România
pp. 1-6

A Petri net model for constraint satisfaction application in holonic systems (Abstract)

Carlos Pascal , Department of Automatic Control and Applied Informatics “Gheorghe Asachi” Technical University of Iasi, Romania
Doru Panescu , Department of Automatic Control and Applied Informatics “Gheorghe Asachi” Technical University of Iasi, Romania
pp. 1-6

Optimal multi-agent planning solution for a sample gathering problem (Abstract)

Adrian Burlacu , Dept. of Automatic control and Applied Informatics, Gheorghe Asachi Technical University of Iasi, Romania
Marius Kloetzer , Dept. of Automatic control and Applied Informatics, Gheorghe Asachi Technical University of Iasi, Romania
Florin Ostafi , Dept. of Automatic control and Applied Informatics, Gheorghe Asachi Technical University of Iasi, Romania
pp. 1-5

Blank page (PDF)

pp. 1

Blank page (PDF)

pp. 1

Preliminary results on peculiar patterns in fractional coupled oscillators (Abstract)

Carla M. A. Pinto , School of Engineering, Polytechnic of Porto and Center of Mathematics, University of Porto and GECAD - Knowledge Engineering and Decision Support Research Center Rua Dr António Bernardino de Almeida, 431 4200-072 Porto, Portugal
pp. 1-5

Active disturbance rejection controller for a separation column (Abstract)

Eva H. Dulf , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Roxana Both , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Cristina I. Muresan , Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Vibration suppression in smart structures using fractional order PD controllers (Abstract)

Cristina I. Muresan , Dept. of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Ovidiu Prodan , Dept. of Civil Engineering, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-5

Power law and fractional derivative models can measure analgesia (Abstract)

Clara Mihaela Ionescu , Technical University of Cluj-Napoca, Faculty of Automation and Computers, Str. G. Baritiu nr. 26-28, 400027 Cluj-Napoca, Romania
Florina Dana Ionescu , Technical University of Construction, Faculty of Civil, Agricultural and Industrial Engineering, Blvd Lacul Tei 122-124, 38R0-020396
pp. 1-4

Fractional-order feedback control of a poorly damped system (Abstract)

Amelie Chevalier , Ghent University, Department of Electrical energy, Systems and Automation (EeSA), Technologiepark 913, 9052, Gent-Zwijnaarde, Belgium
Cosmin Copot , Ghent University, Department of Electrical energy, Systems and Automation (EeSA), Technologiepark 913, 9052, Gent-Zwijnaarde, Belgium
Dana Copot , Ghent University, Department of Electrical energy, Systems and Automation (EeSA), Technologiepark 913, 9052, Gent-Zwijnaarde, Belgium
Clara M. Ionescu , Ghent University, Department of Electrical energy, Systems and Automation (EeSA), Technologiepark 913, 9052, Gent-Zwijnaarde, Belgium
Robin De Keyser , Ghent University, Department of Electrical energy, Systems and Automation (EeSA), Technologiepark 913, 9052, Gent-Zwijnaarde, Belgium
pp. 1-4

Blank page (PDF)

pp. 1

Sizing photovoltaic-wind smart microgrid with battery storage and grid connection (Abstract)

Patarau Toma , Department of Applied Electronics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
Petreus Dorin , Department of Applied Electronics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
Etz Radu , Department of Applied Electronics, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
Moga Daniel , Department of Automation, Technical University of Cluj-Napoca, UTCN, Cluj-Napoca, Romania
pp. 1-5

NN based support system for renewable energy forecasting (Abstract)

Otilia Elena Dragomir , Automation, Computer Science Department, Valahia University of Târgoviste, Târgoviste, Romania
Florin Dragomir , Automation, Computer Science Department, Valahia University of Târgoviste, Târgoviste, Romania
pp. 1-6

Adaptive voltage control, integrated function of a numerical transformer protection system (Abstract)

Iulia-Cristina Constantin , Automatic Control and Computers Faculty, University “Politehnica” of Bucharest, Bucharest, Romania
Ionela-Marilena Dragomir , Automatic Control and Computers Faculty, University “Politehnica” of Bucharest, Bucharest, Romania
Costel Constantin , Power Engineering Faculty, University “Politehnica” of Bucharest, Bucharest, Romania
Sergiu Stelian Iliescu , Automatic Control and Computers Faculty, University “Politehnica” of Bucharest, Bucharest, Romania
pp. 1-6

Blank page (PDF)

pp. 1

Blank page (PDF)

pp. 1

GIS data modeling in water management decision support systems (Abstract)

Marius Rata , DUK TECH, Iasi, Romania
Tudor Viorel Blidaru , ABA Prut - Barlad, Iasi, Romania
Paul Serban Agachi , Department of Chemical Engineering, Babes-Bolyai University, Cluj-Napoca, Romania
pp. 1-6

Security and intrusion detection on critical SCADA systems for water management (Abstract)

I. Stoian , SC IPA SA Cluj, Cluj-Napoca, Romania
S. Ignat , SC IPA SA Cluj, Cluj-Napoca, Romania
D. Capatina , SC IPA SA Cluj, Cluj-Napoca, Romania
O. Ghiran , SC IPA SA Cluj, Cluj-Napoca, Romania
pp. 1-6

SCADA and modeling in water management (Abstract)

I. Stoian , SC IPA SA Cluj, Cluj-Napoca, Romania
D. Capatina , SC IPA SA Cluj, Cluj-Napoca, Romania
S. Ignat , SC IPA SA Cluj, Cluj-Napoca, Romania
O. Ghiran , SC IPA SA Cluj, Cluj-Napoca, Romania
pp. 1-6

Simplified approach for flood estimation and propagation (Abstract)

Radu Drobot , Department of Hydrotechnic Engineering, Technical University of Civil Engineering, Bucharest, Romania
Cristian Dinu , Department of Hydrotechnic Engineering, Technical University of Civil Engineering, Bucharest, Romania
Aurelian Draghia , Department of Hydrotechnic Engineering, Technical University of Civil Engineering, Bucharest, Romania
Mary Jeanne Adler , Hydrology Department National Institute of Hydrology and Water Management Bucharest, Romania
Ciprian Corbus , Hydrology Department National Institute of Hydrology and Water Management Bucharest, Romania
Marius Matreata , Hydrology Department National Institute of Hydrology and Water Management Bucharest, Romania
pp. 1-6

DSS for operation of the lateral reservoirs during flood period (Abstract)

Drobot Radu , Dept. of Hydrotechnic Engineering, Technical University of Civil Engineering, Bucharest, Romania
Aurelian Draghia , Dept. of Hydrotechnic Engineering, Technical University of Civil Engineering, Bucharest, Romania
pp. 1-6

Blank page (PDF)

pp. 1

Modelling versions and simulations of the cryogenic air distillation column (Abstract)

A. Cioloca , Technical University of Cluj Napoca, Memorandumului St., No.28, RO- 400014, Cluj-Napoca, Romania
R. Both , Technical University of Cluj Napoca, Memorandumului St., No.28, RO- 400014, Cluj-Napoca, Romania
pp. 1-6

The experimental identification of the separation cascade of (18O) in the NO, NO2 — H2O, HNO3 system (Abstract)

M. Secara , Department of Automation, Technical University of Cluj-Napoca, George Baritiu Street, No.26-28, 400114 Cluj-Napoca, Romania
M. Abrudean , Department of Automation, Technical University of Cluj-Napoca, George Baritiu Street, No.26-28, 400114 Cluj-Napoca, Romania
Maria Loredana Boca , Department of Computer Science and Engineering “1 Decembrie 1918” University of Alba Iulia, Gabriel Bethlen Street, No. 5, Alba Iulia, Romania
B. Croitoru , Department of Computer Science and Engineering “1 Decembrie 1918” University of Alba Iulia, Gabriel Bethlen Street, No. 5, Alba Iulia, Romania
pp. 1-4

Control system for a distributed parameter process, with applications in isotope separation domain: Case study (Abstract)

Mihaela-Ligia Unguresan , Physics and Chemistry Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Vlad Muresan , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Tiberiu Colosi , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Analogical modeling and numerical simulation variant for distributed parameter processes, with applications in isotope separations, chemistry and thermo-energetics (Abstract)

Tiberiu Colosi , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Mihail Abrudean , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Mihaela-Ligia Unguresan , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Vlad Muresan , Automation Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-10

Numerical simulation of distributed parameter processes using Cartesian, spherical, cylindrical and spiral coordinates (Abstract)

Tiberiu Colosi , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Mihaela-Ligia Unguresan , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Vlad Muresan , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-6

Advanced models for cryogenic distillation columns (Abstract)

A. Cioloca , Technical University of Cluj Napoca, Memorandumului St., No.28, RO- 400014, Cluj-Napoca, Romania
R. Both , Technical University of Cluj Napoca, Memorandumului St., No.28, RO- 400014, Cluj-Napoca, Romania
R. Festila , Technical University of Cluj Napoca, Memorandumului St., No.28, RO- 400014, Cluj-Napoca, Romania
pp. 1-4

Application for some parameters monitoring in installation for isotopes separation (Abstract)

M. R. C. Trusca , Datacenter Department, INCDTIM Cluj-Napoca, Romania
S. Albert , Datacenter Department, INCDTIM Cluj-Napoca, Romania
M. L. Soran , Datacenter Department, INCDTIM Cluj-Napoca, Romania
C. Varodi , Datacenter Department, INCDTIM Cluj-Napoca, Romania
F. Farcas , Datacenter Department, INCDTIM Cluj-Napoca, Romania
M. L. Ungurecan , Technical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-3
77 ms
(Ver 3.3 (11022016))