The Community for Technology Leaders
RSS Icon
Issue No.01 - January-March (2008 vol.7)
pp: 14-21
Diana Hodgins , European Technology for Business
Arnaud Bertsch , Ecole Polytechnique Fédérale de Lausanne
Nils Post , Intelligent Medical Implants
Manfred Frischholz , Campus Micro Technologies
Bart Volckaerts , Cochlear Technology Centre Europe
John Spensley , Finetech Medical
J.M. Wasikiewicz , University of London
Henry Higgins , Zarlink Semiconductor
Felix von Stetten , Stetten University of Freiburg
Laurence Kenney , University of Salford
The Healthy Aims project,, is a
medical implants, wireless, sensors, microelectromechanical devices, MEMS, biological systems, nanotechnology
Diana Hodgins, Arnaud Bertsch, Nils Post, Manfred Frischholz, Bart Volckaerts, John Spensley, J.M. Wasikiewicz, Henry Higgins, Felix von Stetten, Laurence Kenney, "Healthy Aims: Developing New Medical Implants and Diagnostic Equipment", IEEE Pervasive Computing, vol.7, no. 1, pp. 14-21, January-March 2008, doi:10.1109/MPRV.2008.8
1. R. Hornig et al., "A Method and Technical Equipment for an Acute Human Trial to Evaluate Retinal Implant Technology," J. Neural Eng., vol. 2, no. 1, 2005, pp. S129–S134.
2. T.A. Fofonoff et al., "Microelectrode Array Fabrication by Electrical Discharge Machining and Chemical Etching," IEEE Trans. Biomedical Eng., vol. 51, no. 6, 2004, pp. 890–895.
3. P. Tresadern et al., "A Clinical Set-up Tool (CST) for Rapid Stimulator Programming," Proc. 29th IEEE Ann. Int'l Conf. Eng. Medicine and Biology Society (EMBS 07), IEEE Press, 2007, pp. 3577–3580.
4. M. Vanden Bulcke et al., "Active Electrode Arrays by Chip Embedding in a Flexible Silicone Carrier," Proc. 28th IEEE Ann. Int'l Conf. Eng. Medicine and Biology Society (EMBS 06), IEEE Press, 2006, pp. 2811–2815.
5. M. Leonardi et al., "A Soft Contact Lens with a MEMS Strain Gage Embedded for Intraoccular Pressure Monitoring," Proc. 12th Int'l Conf. Transducers, Solid-State Sensors, Actuators, and Microsystems (Transducers 03), IEEE Press, 2003, pp. 1043–1046.
6. T. Eggers and M. Wenzel, "Implantable Telemetric Pressure Measurement," MedicalDevice Technology, vol. 15, no. 4, 2004.
7. M.J. Mathie et al., "Accelerometry: Providing an Integrated, Practical Method for Long-Term, Ambulatory Monitoring of Human Movement," Physiological Measurement, vol. 25, no. 2, 2004, pp. R1–20.
8. F. von Stetten et al., "A One-Compartment, Direct Glucose Fuel Cell for Powering Long-Term Medical Implants," Proc. 19th IEEE Int'l Conf. Micro Electro Mechanical Systems (MEMS 06), IEEE Press, 2006, pp. 934–937.
9. S.M. Reddy and P.M. Vadgama, "Ion Exchanger Modified PVC Membranes—Selectivity Studies and Response Amplification of Oxalate and Lactate Enzyme Electrodes," Biosensors and Bioelectronics, vol. 12, nos. 9–10, 1997, pp. 1003–1012.
10. J. Franks, T.L. Ng, and A.C. Wright, "Preparation and Characteristics of Diamond-Like Carbon Films," Vacuum, vol. 38, nos. 8–10, 1988, pp. 749–751.
11. H. Higgins, "Wireless Communication," Body Sensor Networks, G.Z. Yang, ed., Springer, 2006, pp. 117–144.
6 ms
(Ver 2.0)

Marketing Automation Platform Marketing Automation Tool