20th IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems (DFT'05) On the Transformation of Manufacturing Test Sets into On-Line Test Sets for Microprocessors Monterey, California October 03-October 05 ISBN: 0-7695-2464-8
DOI Bookmark: http://doi.ieeecomputersociety.org/10.1109/DFTVS.2005.53
In software-based self-test (SBST) a microprocessor executes a set of test programs devised for detecting the highest possible percentage of faults. The main advantages of this approach are its high defect fault coverage (being performed at-speed) and the reduced cost (since it does not require any change in the processor hardware). SBST can also be used for on-line test of a microprocessor-based system. However, some additional constraints exist in this case (e.g. in terms of test length and duration, as well as intrusiveness). This paper faces the issue of automatically transforming a test set devised for manufacturing test in a test set suitable for on-line test. Experimental results are reported on an Intel 8051 microcontroller.
Citation:
E. S?nchez, M. Sonza Reorda, G. Squillero, "On the Transformation of Manufacturing Test Sets into On-Line Test Sets for Microprocessors," dft, pp.494-504, 20th IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems (DFT'05), 2005 Usage of this product signifies your acceptance of the Terms of Use. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||