loading...
 This Article 
   
 Share 
   
 Bibliographic References 
   
 Add to: 
 
Digg
Furl
Spurl
Blink
Simpy
Google
Del.icio.us
Y!MyWeb
 
 Search 
   
Design, Automation and Test in Europe (DATE '00)
The Generalized Boundary Curve—A Common Method for Automatic Nominal Design and Design Centering of Analog Circuits
Paris, France
March 27-March 30
ISBN: 0-7695-0537-6
ASCII Text
x 
 
R. Schwencker, F. Schenkel, H. Graeb, K. Antreich, "The Generalized Boundary Curve—A Common Method for Automatic Nominal Design and Design Centering of Analog Circuits," Design, Automation and Test in Europe Conference and Exhibition, pp. 42, Design, Automation and Test in Europe (DATE '00), 2000.
 
 
BibTex
x
 
@article{ 10.1109/DATE.2000.840013,
author = {R. Schwencker and F. Schenkel and H. Graeb and K. Antreich},
title = {The Generalized Boundary Curve—A Common Method for Automatic Nominal Design and Design Centering of Analog Circuits},
journal ={Design, Automation and Test in Europe Conference and Exhibition},
volume = {0},
year = {2000},
issn = {1530-1591},
pages = {42},
doi = {http://doi.ieeecomputersociety.org/10.1109/DATE.2000.840013},
publisher = {IEEE Computer Society},
address = {Los Alamitos, CA, USA},
}
 
 
RefWorks Procite/RefMan/Endnote
x 
 
TY - CONF
JO - Design, Automation and Test in Europe Conference and Exhibition
TI - The Generalized Boundary Curve—A Common Method for Automatic Nominal Design and Design Centering of Analog Circuits
SN - 1530-1591
SP
EP
A1 - R. Schwencker,
A1 - F. Schenkel,
A1 - H. Graeb,
A1 - K. Antreich,
PY - 2000
VL - 0
JA - Design, Automation and Test in Europe Conference and Exhibition
ER -
 
R. Schwencker, Infineon Technologies and Technical University of Munich
F. Schenkel, Infineon Technologies
H. Graeb, Infineon Technologies
K. Antreich, Infineon Technologies
In this paper, a new method for analog circuit sizing with respect to manufacturing and operating tolerances is presented. Two types of robustness objectives are presented, i.e. parameter distances for the nominal design and worst-case distances for the design centering. Moreover, the generalized boundary curve is presented as a method to determine a parameter correction within an iterative trust region algorithm. Results show that a significant reduction in computational costs is achieved using the presented robustness objectives and generalized boundary curve.
Citation:
R. Schwencker, F. Schenkel, H. Graeb, K. Antreich, "The Generalized Boundary Curve—A Common Method for Automatic Nominal Design and Design Centering of Analog Circuits," date, pp.42, Design, Automation and Test in Europe (DATE '00), 2000
Usage of this product signifies your acceptance of the Terms of Use.