Preface

Conference Committees (PDF)

pp. xi-xii

Reviewers (PDF)

pp. xiii

INVITED TALK

Dynamic Body Transformation and Matching from Scanned Data (PDF)

Nadia Magnenat-Thalmann, MIRALab - University of Geneva

Hyewon Seo, MIRALab - University of Geneva

pp. 3

IMPLICIT SURFACES

A Hybrid Shape Representation for Free-Form Modelling (Abstract)

Rémi Allègre, LIRIS CNRS, Université Claude Bernard Lyon 1

Aurélien Barbier, LIRIS CNRS, Université Claude Bernard Lyon 1

Eric Galin, LIRIS CNRS, Université Claude Bernard Lyon 1

Samir Akkouche, LIRIS CNRS, Université Claude Bernard Lyon 1

pp. 7-18

PDF

Multi-Scale Reconstruction of Implicit Surfaces with Attributes from Large Unorganized Point Sets (Abstract)

Ireneusz Tobor, LaBRI - CNRS - INRIA, Universite Bordeaux 1

Patrick Reuter, LaBRI - CNRS - INRIA, Universite Bordeaux 1

Christophe Schlick, LaBRI - CNRS - INRIA, Universite Bordeaux 1

pp. 19-30

PDF

3D Scattered Data Approximation with Adaptive Compactly Supported Radial Basis Functions (Abstract)

Yutaka Ohtake, Max-Planck-Institut für Informatik and RIKEN

Alexander Belyaev, Max-Planck-Institut für Informatik

Hans-Peter Seidel, Max-Planck-Institut für Informatik

pp. 31-39

PDF

FEATURE-BASED MODELING AND DEFORMATIONS

Fitting and Manipulating Freeform Shapes by Extendable Freeform Templates (Abstract)

Y. Song, Delft University of Technology

J.S.M. Vergeest, Delft University of Technology

S. Spanjaard, Delft University of Technology

pp. 43-52

PDF

Multi-Minimisations for Shape Control of Fully Free-Form Deformation Features (Abstract)

J-P. Pernot, Domaine Universitaire

S. Guillet, Domaine Universitaire

J-C. L?on, Domaine Universitaire

B. Falcidieno, Istituto di Matematica Applicata e Tecnologie Informatiche - CNR

F. Giannini, Istituto di Matematica Applicata e Tecnologie Informatiche - CNR

pp. 53-62

PDF

Sweepers: Swept User-Defined Tools for Modeling by Deformation (Abstract)

Alexis Angelidis, University of Otago

Geoff Wyvill, University of Otago

Marie-Paule Cani, Laboratoire GRAVIR

pp. 63-73

PDF

GEOMETRIC ALGORITMS

Computing Planar Sections of Surfaces of Revolution with Revolute Quadric Decomposition (Abstract)

Jinyuan Jia, Hong Kong University of Science and Technology and Liaoning University of Petroleum & Chemical Technology

Kai Tang, Hong Kong University of Science and Technology

Ajay Joneja, Hong Kong University of Science and Technology

Ki-Wan Kwok, Hong Kong Polytechnic University

pp. 77-86

PDF

Nonlinear Polynomial Systems: Multiple Roots and Their Multiplicities (Abstract)

K. H. Ko, Massachusetts Institute of Technology

T. Sakkalis, Massachusetts Institute of Technology

N. M. Patrikalakis, Massachusetts Institute of Technology

pp. 87-98

PDF

SUBDIVISION SURFACES

Polygonal Decomposition of the 1-Ring Neighborhood of the Catmull-Clark Scheme (Abstract)

I.P. Ivrissimtzis, MPI - Informatik

R. Zayer, MPI - Informatik

H.-P. Seidel, MPI - Informatik

pp. 101-109

PDF

Semiregular Pentagonal Subdivisions (Abstract)

Ergun Akleman, Texas A&M University

Vinod Srinivasan, Texas A&M University

Zeki Melek, Texas A&M University

Paul Edmundson, Texas A&M University

pp. 110-118

PDF

Detail-Preserving Variational Surface Design with Multiresolution Constraints (Abstract)

Ioana Boier-Martin, IBM T. J. Watson Research Center

Remi Ronfard, INRIA Rhône-Alpes

Fausto Bernardini, IBM T. J. Watson Research Center

pp. 119-128

PDF

Surface Quality Assessment of Subdivision Surfaces on Programmable Graphics Hardware (Abstract)

Yusuke Yasui, Keio University SFC

Takashi Kanai, Keio University SFC

pp. 129-138

PDF

A Generative Theory of Shape (PDF)

Michael Leyton, Rugters University

pp. 141

SHAPE RETRIEVAL

A Survey of Content Based 3D Shape Retrieval Methods (Abstract)

Johan W.H. Tangelder, Utrecht University

Remco C. Veltkamp, Utrecht University

pp. 145-156

PDF

Augmented Reeb Graphs for Content-Based Retrieval of 3D Mesh Models (Abstract)

Tony Tung, Ecole Nationale Supérieure des Télécommunications

Francis Schmitt, Ecole Nationale Supérieure des Télécommunications

pp. 157-166

PDF

The Princeton Shape Benchmark (Abstract)

Philip Shilane, Princeton University

Patrick Min, Princeton University

Michael Kazhdan, Princeton University

Thomas Funkhouser, Princeton University

pp. 167-178

PDF

MESH PROCESSING

Differential Coordinates for Interactive Mesh Editing (Abstract)

Yaron Lipman, Tel-Aviv University

Olga Sorkine, Tel-Aviv University

Daniel Cohen-Or, Tel-Aviv University

David Levin, Tel-Aviv University

Christian Rössl, MPI Saarbrücken

Hans-Peter Seidel, MPI Saarbrücken

pp. 181-190

PDF

Least-Squares Meshes (Abstract)

Olga Sorkine, Tel Aviv University

Daniel Cohen-Or, Tel Aviv University

pp. 191-199

PDF

A Fast and Simple Stretch-Minimizing Mesh Parameterization (Abstract)

Shin Yoshizawa, MPI Informatik

Alexander Belyaev, MPI Informatik

Hans-Peter Seidel, MPI Informatik

pp. 200-208

PDF

View-Dependent Streaming of Progressive Meshes (Abstract)

Junho Kim, POSTECH and RWTH

Seungyong Lee, POSTECH

Leif Kobbelt, RWTH

pp. 209-220

PDF

Constant-Time Navigation in Four-Dimensional Nested Simplicial Meshes (Abstract)

Michael Lee, University of Maryland at College Park

Leila De Floriani, University of Maryland at College Park and Università di Genova

Hanan Samet, University of Maryland at College Park

pp. 221-230

PDF

POINT-BASED MODELING

Robust Watermarking of Point-Sampled Geometry (Abstract)

Daniel Cotting, Swiss Federal Institute of Technology

Tim Weyrich, Swiss Federal Institute of Technology

Mark Pauly, Stanford University

Markus Gross, Swiss Federal Institute of Technology

pp. 233-242

PDF

Approximating Bounded, Non-Orientable Surfaces from Points (Abstract)

Anders Adamson, Darmstadt University of Technology

Marc Alexa, Darmstadt University of Technology

pp. 243-252

PDF

APPLICATIONS I

Evaluation and Visualization of Stress and Strain on Soft Biological Tissues in Contact (Abstract)

Sofiane Sarni, Swiss Federal Institute of Technology

Anderson Maciel, Swiss Federal Institute of Technology

Ronan Boulic, Swiss Federal Institute of Technology

Daniel Thalmann, Swiss Federal Institute of Technology

pp. 255-262

PDF

Mold Accessibility via Gauss Map Analysis (Abstract)

Gershon Elber, Technion

Xianming Chen, University of Utah

Elaine Cohen, University of Utah

pp. 263-272

PDF

INTERACTIVE MODELING

Stroke-Input Methods for Immersive Styling Environments (Abstract)

Timo Fleisch, Fraunhofer IGD

Gino Brunetti, Fraunhofer IGD

Pedro Santos, Fraunhofer IGD

Andr? Stork, Fraunhofer IGD

pp. 275-283

PDF

A Novel Interface Paradigm for Supporting Product Design (Abstract)

Kuo-Cheng Wu, University of Salford

Terrence Fernando, University of Salford

pp. 284-290

PDF

Building Shapes by Self-Assembly (PDF)

Aristides A. G. Requicha, University of Southern California

pp. 293

APPLICATIONS II

Contouring Medial Surface of Thin Plate Structure Using Local Marching Cubes (Abstract)

Tomoyuki Fujimori, University of Tokyo

Hiromasa Suzuki, University of Tokyo

Yohei Kobayashi, University of Tokyo

Kiwamu Kase, RIKEN

pp. 297-306

PDF

Closing Gaps by Clustering Unseen Directions (Abstract)

G. Impoco, Consiglio Nazionale delle Ricerche

P. Cignoni, Consiglio Nazionale delle Ricerche

R. Scopigno, Consiglio Nazionale delle Ricerche

pp. 307-316

PDF

Extension of ISO 10303, the STEP Standard, for the Exchange of Procedural Shape Models (Abstract)

Michael J. Pratt, LMR Systems

pp. 317-326

PDF

SPECIAL SESSION

AIM@SHAPE Project Presentation (PDF)

Bianca Falcidieno, IMATI CNR

pp. 329

SHORT PAPERS

Verification of Scanned Engineering Parts with CAD Models Based on Discrete Curvature Estimation (Abstract)

B. Lipshitz, Technion-Israel Institute of Technology

A. Fischer, Technion-Israel Institute of Technology

pp. 333-336

PDF

Decomposition of Complex Models for Manufacture (Abstract)

T. Lim, Heriot-Watt University

H. Medellin, Heriot-Watt University

J.R. Corney, Heriot-Watt University

J.M. Ritchie, Heriot-Watt University

J.B.C. Davies, Heriot-Watt University

pp. 337-341

PDF

Using Semi-Implicit Representation of Algebraic Surfaces (Abstract)

Laurent Busé, INRIA Sophia-Antipolis

André Galligo, Université de Nice Sophia-Antipolis

pp. 342-345

PDF

Procedural Modeling of Cracks and Fractures (Abstract)

Aurélien Martinet, Artis-GRAVIR INRIA Rhône Alpes

Eric Galin, LIRIS CNRS UCB Lyon 1

Brett Desbenoit, LIRIS CNRS UCB Lyon 1

Samir Akkouche, LIRIS CNRS UCB Lyon 1

pp. 346-349

PDF

Generative Parametric Design of Gothic Window Tracery (Abstract)

Sven Havemann, TU Braunschweig

Dieter Fellner, TU Braunschweig

pp. 350-353

PDF

Modeling the Coronary Artery Tree (Abstract)

pp. 354-357

PDF

Empirical Analysis of Computational and Accuracy Tradeoffs Using Compactly Supported Radial Basis Functions for Surface Reconstruction (Abstract)

Bryan Morse, Brigham Young University

Weiming Liu, Brigham Young University

Lauralea Otis, Brigham Young University

pp. 358-361

PDF

Shape Deformations with Meaningful Parameters and Constraints (Abstract)

Raluca Dumitrescu, Delft University of Technology

Joris S.M. Vergeest, Delft University of Technology

pp. 362-366

PDF

Calibration Issues for Projector-based 3D-Scanning (Abstract)

pp. 367-370

PDF

Reeb Graph Representation of Surfaces with Boundary (Abstract)

Silvia Biasotti, Consiglio Nazionale delle Ricerche

pp. 371-374

PDF

Shape Recovery Using Functionally Represented Constructive Models (Abstract)

Pierre-Alain Fayolle, University of Aizu

Alexander Pasko, Hosei University

Elena Kartasheva, Institute for Mathematical Modeling

Nikolay Mirenkov, University of Aizu

pp. 375-378

PDF

A Scan-Line Algorithm for Clustering Line Segments (Abstract)

K. V. Kostas, National Technical University of Athens

A. I. Ginnis, National Technical University of Athens

P. D. Kaklis, National Technical University of Athens

pp. 379-382

PDF

A Hybrid Shape Representation for Free-Form Modelling (Figures 7, 9, and 10) (PDF)

COLOR PLATES

pp. 385

Detail-Preserving Variational Surface Design with Multiresolution Constraints (Figures 5, 8, and 9) (PDF)

pp. 386

Surface Quality Assessment of Subdivision Surfaces on Programmable Graphics Hardware (Figures 7, 8, and 9) (PDF)

pp. 387

A Survey of Content Based 3D Shape Retrieval Methods (Figure 5) (PDF)

pp. 388

The Princeton Shape Benchmark (Figures 1 and 2) (PDF)

P. Min

pp. 388

Augmented Reeb Graphs for Content-Based Retrieval of 3D Mesh Models (Figures 2 and 15) (PDF)

T. Tung

F. Schmitt

pp. 389

A Fast and Simple Stretch-Minimizing Mesh Parameterization (Figures 1 And 9) (PDF)

pp. 390

View-Dependent Streaming of Progressive Meshes (Figure 9) (PDF)

J. Kim

S. Lee

L. Kobbelt

pp. 391

Robust Watermarking of Point-Sampled Geometry (Figures 6, 7, 8, 9, 10, 11, 12, 13, and 14) (PDF)

pp. 392

Approximating Bounded, Non-Orientable Surfaces from Points (Figures 5, 6, and 7) (PDF)

pp. 393

Evaluation and Visualization of Stress and Strain on Soft Biological Tissues in Contact (Figure 7) (PDF)

pp. 394

Mold Accessibility via Gauss Map Analysis (Figure 4) (PDF)

X. Chen

pp. 395

A Novel Interface Paradigm for Supporting Product Design (Figures 4 and 7) (PDF)

pp. 395

Contouring Medial Surface of Thin Plate Structure Using Local Marching Cubes (Figures 15, 16, and 17) (PDF)

T. Fujimori

H. Suzuki

Y. Kobayashi

K. Kase

pp. 396

Verification of Scanned Engineering Parts with CAD Models Based on Discrete Curvature Estimation (Figures 1, 2, 3, 4, and 5) (PDF)

Closing Gaps by Clustering Unseen Directions (Figures 5, 6, 7, and 8) (PDF)

pp. 397

pp. 398

Modeling the Coronary Artery Tree (Figures 1, 2, 4, and 5) (PDF)

T B?

pp. 399

Shape Recovery Using Functionally Represented Constructive Models (Figure 2) (PDF)

pp. 400

Author Index

Author Index (PDF)

pp. 401-402