Automatic toolset for fault tolerant design: results demonstration on a running industrial application

	This Article
	Subscribers, please Login Purchase article: $19 PDF IEEE Xplore Subscribers RSS feed
	Share
	Email this Article to a friend
	Bibliographic References
	ASCII Text BibTex RefWorks Procite/RefMan/Endnote
	Add to:
	Digg Furl Spurl Blink Simpy Google Del.icio.us Y!MyWeb
	Search
	Similar Articles Articles by Alberto Manzone Articles by Claudio Genta

9th IEEE International On-Line Testing Symposium

Kos Island, Greece

July 07-July 09

ISBN: 0-7695-1968-7

	ASCII Text	x
	Alberto Manzone, Claudio Genta, "Automatic toolset for fault tolerant design: results demonstration on a running industrial application," IEEE International On-Line Testing Symposium, pp. 197, 9th IEEE International On-Line Testing Symposium, 2003.

	BibTex	x
	@article{ 10.1109/OLT.2003.1214398, author = {Alberto Manzone and Claudio Genta}, title = {Automatic toolset for fault tolerant design: results demonstration on a running industrial application}, journal ={IEEE International On-Line Testing Symposium}, volume = {0}, year = {2003}, isbn = {0-7695-1968-7}, pages = {197}, doi = {http://doi.ieeecomputersociety.org/10.1109/OLT.2003.1214398}, publisher = {IEEE Computer Society}, address = {Los Alamitos, CA, USA}, }

	RefWorks Procite/RefMan/Endnote	x
	TY - CONF JO - IEEE International On-Line Testing Symposium TI - Automatic toolset for fault tolerant design: results demonstration on a running industrial application SN - 0-7695-1968-7 SP EP A1 - Alberto Manzone, A1 - Claudio Genta, PY - 2003 KW - null VL - 0 JA - IEEE International On-Line Testing Symposium ER -

Alberto Manzone, Centro Ricerche FIAT

Claudio Genta, Centro Ricerche FIAT

DOI Bookmark: http://doi.ieeecomputersociety.org/10.1109/OLT.2003.1214398

This paper describes an automatic toolset for validate fault tolerant designs. The toolset has been produced as a demonstrator for the AMATISTA European project (IST project 11762), to test the effectiveness of the new FT (Fault Tolerant) tools, developed as the main target of the project.

The toolset has been applied on a typical automotive application already modified by the insertion of FT structures.

This paper describes the set up of the demonstrator and the significant results obtained.

Citation:

Alberto Manzone, Claudio Genta, "Automatic toolset for fault tolerant design: results demonstration on a running industrial application," iolts, pp.197, 9th IEEE International On-Line Testing Symposium, 2003

Peer Review Notice | Give Us Feedback

Usage of this product signifies your acceptance of the Terms of Use.