|
|
Table of Contents
Who Needs an Architect? (Abstract)
pp. 11-13
pp. 14-18
UML without Pictures (Abstract)
Conrad Bock, US National Institute of Standards and Technology pp. 33-35
Colin Atkinson, University of Mannheim
Thomas K?, Darmstadt University of Technology pp. 36-41
Shane Sendall, Swiss Federal Institute of Technology in Lausanne
Wojtek Kozaczynski, Microsoft pp. 42-45
Model Metamorphosis (Abstract)
Torben Weis, Berlin University of Technology
Andreas Ulbrich, Berlin University of Technology
Kurt Geihs, Berlin University of Technology pp. 46-51
Robert France, Colorado State University
Sudipto Ghosh, Colorado State University
Eunjee Song, Colorado State University
Dae-Kyoo Kim, Colorado State University pp. 52?58
Peter Denno, US National Institute of Standards and Technology
Michelle Potts Steves, US National Institute of Standards and Technology
Don Libes, US National Institute of Standards and Technology
Edward J. Barkmeyer, US National Institute of Standards and Technology pp. 59?63
Vinay Kulkarni, Tata Research Development and Design Centre
Sreedhar Reddy, Tata Research Development and Design Centre pp. 64-69
Point/Counterpoint (Abstract)
Axel Uhl, Interactive Objects Software
Scott W. Ambler, Ronin International pp. 70-73
Putting Your Best Tests Forward (Abstract)
pp. 74-77
Alan MacCormack, Harvard University
Chris F. Kemerer, University of Pittsburgh
Michael Cusumano, Massachusetts Institute of Technology
Bill Crandall, Hewlett-Packard pp. 78-85
Ivan Aaen, Aalborg University pp. 86-93
pp. 94-96
Preparing the Raw Material (Abstract)
pp. 97-98
Risk Management during Requirements (Abstract)
pp. 99-101
In the News (Abstract)
pp. 104-108
Good Enough Is Not Good Enough (Abstract)
pp. 109
pp. 112, 110-111 Usage of this product signifies your acceptance of the Terms of Use.
| |||||||||||||||||||||||||||||||||||||||||||||||

