The Community for Technology Leaders
RSS Icon
Subscribe
Issue No.09 - September (2009 vol.31)
pp: 1726-1728
Jianzhuang Liu , The Chinese University of Hong Kong, Hong Kong
Liangliang Cao , University of Illinois at Urbana-Champaign, Urbana
Zhenguo Li , The Chinese University of Hong Kong, Hong Kong
Xiaoou Tang , The Chinese University of Hong Kong, Hong Kong
ABSTRACT
We disagree with the comments made by Varley [1] on our previous paper [2]. In this paper, we respond to his comments and show that they are not correct.
INDEX TERMS
3D reconstruction, degree of reconstruction freedom, line drawings, singular value decomposition.
CITATION
Jianzhuang Liu, Liangliang Cao, Zhenguo Li, Xiaoou Tang, "Responses to the Comments on “Plane-Based Optimization for 3D Object Reconstruction from Single Line Drawings”", IEEE Transactions on Pattern Analysis & Machine Intelligence, vol.31, no. 9, pp. 1726-1728, September 2009, doi:10.1109/TPAMI.2009.118
REFERENCES
[1] P.A.C. Varley, “Comments on `Plane-Based Optimization for 3D Object Reconstruction from Single Line Drawings',” IEEE Trans. Pattern Analysis and Machine Intelligence, vol. 31, no. 8, pp. , Aug. 2009.
[2] J. Liu, L. Cao, Z. Li, and X. Tang, “Plane-Based Optimization for 3D Object Reconstruction from Single Line Drawings,” IEEE Trans. Pattern Analysis and Machine Intelligence, vol. 30, no. 2, pp. 315-327, Feb. 2008.
[3] I.J. Grimstead and R.R. Martin, “Creating Solid Models from Single 2D Sketches,” Proc. Third Symp. Solid Modeling and Applications, pp. 323-337, 1995.
[4] J.X. Ge, S.C. Chou, and X.S. Gao, “Geometric Constraint Satisfaction using Optimization Methods,” Computer-Aided Design, vol. 31, pp. 867-879, 1999.
[5] A.V. Kumar and L. Yu, “Sequential Constraint Imposition for Dimension-Driven Solid Models,” Computer-Aided Design, vol. 33, pp. 475-486, 2001.
[6] F.G. Langbein, A.D. Marshall, and R.R. Martin, “Choosing Consistent Constraints for Beautification of Reverse Engineered Geometric Models,” Computer-Aided Design, vol. 36, pp. 261-278, 2004.
[7] Y.T. Li, S.M. Hu, and J.G. Sun, “On the Numerical Redundancies of Geometric Constraint Systems,” Proc. Ninth Pacific Conf. Computer Graphics and Applications, pp. 118-123, 2001.
[8] Y. Leclerc and M. Fischler, “An Optimization-Based Approach to the Interpretation of Single Line Drawings as 3D Wire Frames,” Int'l J. Computer Vision, vol. 9, no. 2, pp. 113-136, 1992.
[9] H. Lipson and M. Shpitalni, “Optimization-Based Reconstruction of a 3D Object from a Single Freehand Line Drawing,” Computer-Aided Design, vol. 28, no. 8, pp. 651-663, 1996.
[10] J. Liu and Y. Lee, “A Graph-Based Method for Face Identification from a Single 2D Line Drawing,” IEEE Trans. Pattern Analysis and Machine Intelligence, vol. 23, no. 10, pp. 1106-1119, Oct. 2001.
[11] K. Sugihara, “Resolvable Representations of Polyhedra,” Discrete and Computational Geometry, vol. 21, pp. 243-255, 1999.
6 ms
(Ver 2.0)

Marketing Automation Platform Marketing Automation Tool