- E
- ECODESIGN
- 2001
- 2nd International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign'01)
| | This Publication | | | | | | | |
| | | | Bibliographic References | | | |
| | | | |
2nd International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign'01) Tokyo, Japan December 11-December 15 ISBN: 0-7695-1266-6 Table of Contents
 | Opening Address |
| Plenary I |
| Plenary II |
| Plenary III |
| Closing Session |
Closing Lecture: Comprehensive Product Modelling for Designing Life Cycle Scenarios
| Session A1-1: EcoDesign Strategies |
Hideo Fujimoto, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan pp. 37
Yoshio Matsumoto, School of Information Technology and Electronics, Tokai University pp. 54
| Session A1-2: EcoDesign Case Studies (1) |
Tim McAloone, Department of Mechanical Engineering Technical University of Denmark (DTU) pp. 60
| Session A1-3: EcoDesign Case Studies (2) |
B. Jansen, VITO, the Flemish Institute for Technological Research pp. 82
| Session A2-1: Modular Design |
| Session A2-2: Industrial Design |
| Session A2-3: EcoDesign Case Studies (3) |
Raymond Dawson, Albemarle Corporation, 451 Florida Street, Baton Rouge, LA 70801, U.S.A.
Marcia Hardy, Albemarle Corporation, 451 Florida Street, Baton Rouge, LA 70801, U.S.A.
Susan Landry, Albemarle Corporation, 451 Florida Street, Baton Rouge, LA 70801, U.S.A.
Hiroaki Yamada, Albemarle Corporation, 451 Florida Street, Baton Rouge, LA 70801, U.S.A. pp. 107
Pi-Ju Tsai, Ritsumeikan University, College of Business Administration pp. 116
Pi-Ju Tsai, Ritsumeikan University, College of Business Administration
Satoshi Kawae, Ritsumeikan University, College of Business Administration pp. 122
| Session A2-4: EcoDesign Case Studies (4) |
| Session A3-1: Life Cycle Design |
| Session A3-2: EcoDesign Processes |
Reiner Anderl, Dept. of Computer Integrated Design, TU Darmstadt, Germany pp. 155
Kikuo Fujita, Department of Computer-Controlled Mechanical Systems Osaka University
Shinji Shiba, Department of Computer-Controlled Mechanical Systems Osaka University pp. 162
| Session A3-3: EcoDesign Methods |
Chih-Chen Liu, Department of Mechanical Engineering, Far East College, Tainan, Taiwan
Jahau Lewis Chen, Department of Mechanical Engineering, National Cheng Kung University, Tainan, pp. 168
Sofia Ritzén, Department of Machine Design, Royal Institute of Technology pp. 174
| Session A3-4: Design for X (1) |
| Session A3-5: EcoDesign Case Studies (5) |
Maolin Cai, Tokyo Institute of Technology, caiml@k-k.pi.titech. pp. 208
| Session A3-6: Integration of EcoDesign and CAD |
Thomas Roche, B.Eng, M.Eng, Ph.D. Galway Mayo Institute of Technology, tom.roche@gmit.ie
Elena Man, Tech, M.Eng, National University of Ireland, Galway, elena.man@nuigalway.ie
Jimmie Browne, Ph.D. D.Sc, CIMRU, National University of Ireland, Galway pp. 223
| Session A3-7: Information Sharing for EcoDesign (1) |
B. Jansen, VITO, the Flemish Institute for Technological Research pp. 234
| Session A3-8: Information Sharing for EcoDesign (2) |
| Session A4-1: Design for X (2) |
Suiran Yu, The University of Tokyo, Department of Precision Machinery Engineering
Satoru Kato, The University of Tokyo, Department of Precision Machinery Engineering
Furnihiko Kimura, The University of Tokyo, Department of Precision Machinery Engineering pp. 293
| Session A4-2: Tools for DfX |
Naohiko Oyasato, Environmental Engineering and Analysis Center, Corporate R&D Center, Toshiba Corporation.
Hideki Kobayashi, Environmental Engineering and Analysis Center, Corporate R&D Center, Toshiba Corporation.
Kazuhito Haruki, Environmental Engineering and Analysis Center, Corporate R&D Center, Toshiba Corporation. pp. 303
H. Kang, LG Production engineering Research Center
J. Jung, LG Production engineering Research Center pp. 309
Yuzo Hiroshige, Production Engineering Research Laboratory Hitachi, Ltd.
Takayuki Nishi, Production Engineering Research Laboratory Hitachi, Ltd. pp. 315
Ji-Hyung Park, CAD/CAM Research Center, Korea Institute of Science and Technology, Korea.
Kwang-Kyu Seo, CAD/CAM Research Center, Korea Institute of Science and Technology, Korea.
David Wallace, Department of Mechanical Engineering, MIT, Cambridge, MA, USA. pp. 321
| Session A4-3: LCA Case Studies |
Lisa Oliv, Ericsson Radio Systems Stockholm, Sweden pp. 328
| Session A4-4: Design for Disassembly |
Yasuo Kondo, Division of Environmental System in Production, Graduate Scholl of Tottori University
Ko-suke Hirai, Division of Environmental System in Production, Graduate Scholl of Tottori University
Fumio Obata, Division of Environmental System in Production, Graduate Scholl of Tottori University pp. 366
M. Hoffmann, Austrian Society for Systems Engineering and Automation
B. Kopacek, Austrian Society for Systems Engineering and Automation
P. Kopacek, Austrian Society for Systems Engineering and Automation
R. Knoth, Austrian Society for Systems Engineering and Automation pp. 378
| Session B1-1: Eco-Materials (1) |
| Session B1-2: Eco-Materials (2) |
Hiroto Shin, Headquarters for Technology, INAX Corporation pp. 418
| Session B3-1: Long Fatigue Life (Giga-cycle) of Materials (1) |
| Session B3-2: Long Fatigue Life (Giga-cycle) of Materials (2) |
| Session B4-1: Maintenance |
Jay Lee, University of Wisconsin-Milwaukee, USA pp. 450
Masanori Yamamoto, Faculty of Computer Science and System Engineering, Kyushu Institute of Technology
Riadih Zaier, Faculty of Computer Science and System Engineering, Kyushu Institute of Technology
Peng Chen, Faculty of Computer Science and System Engineering, Kyushu Institute of Technology
Toshia Toyota, Faculty of Computer Science and System Engineering, Kyushu Institute of Technology pp. 466
| Session B4-2: Cleaner Processes and Energy-Saving Processes |
Rreiji Terao, TERAO CO., LTD, 1-7-18 Minami-harimaya, Kochi 780-0833, Japan
Kazunori Mori, TERAO CO., LTD, 1-7-18 Minami-harimaya, Kochi 780-0833, Japan
Masaki Matsui, Gifu University, Faculty of Engineering, Department of Chemistry, pp. 477
| Session C1-1: Reuse and Recycling -- Strategies and Technologies (1) |
Ab Stevels, Design for Sustainability Lab, Faculty OCP, Delft University of Technology, pp. 489
| Session C1-2: Reuse and Recycling -- Strategies and Technologies (2) |
MASAKATSU Nakagawa, Imaging System Business Group; Recycle Business Division, Ricoh Co., Ltd. pp. 499
Mitsuo Ishida, Fuji Xerox Office Supply Co., Ltd. E-mail:mitsuo.ishida@cu.fxos.co.jp pp. 503
Shuichi Ichino, Nakamuna 210, Minami-ashigara -ashi, Kanagawa-ken, Japan pp. 507
| Session C2-1: Inverse Process System Design (1) |
| Session C2-2: Inverse Process System Design (2) |
| Session C3-1: Reuse and Recycling -- Strategies and Technologies (3) |
Erik Sundin, Link?pings Universitet, S-581 83 Link?ping, Sweden. pp. 536
Masao Yukumoto, Graduate School of Engineering, Tokyo Metropolitan University
Misao Murakami, Graduate School of Engineering, Tokyo Metropolitan University
Yasushi Umeda, Graduate School of Engineering, Tokyo Metropolitan University pp. 542
| Session C3-2: Reuse and Recycling -- Strategies and Technologies (4) |
| Session C3-3: Reuse and Recycling -- Strategies and Technologies (5) |
| Session D3-1: Environmental Conscious Market and Corporate Strategies |
Koji Masuda, Environment and Chemical Safety Group, Quality Assurance, Supply Business Company, pp. 601
| Session D3-2: Servicification for Dematerialization |
| Session E3-1:Environmental Education |
| Session E3-2: Environmental Accounting |
| Session E4-1: Social System Design (1) |
| Session E4-2: Social System Design (2) |
| Session E4-3: Labelling and Logistics |
| SessionF1: Supply Chain Management |
| Session F2: Management System (1) |
Kyoko Ohno, Corporate Environment Division, Ricoh, Co., Ltd. pp. 735
Frantz Pierre, Ricoh Electronics, Inc., Georgia Plant, frantz_j._pierre@rei.ricoh.com pp. 760
| Session F3-1: LCA (1) |
HIROYUKI Abe, Corporate Environment Division, Ricoh Co., Ltd. pp. 781
Hiroo Harada, Environment Technology Laboratories., NEC Corporation
Jun Fujimoto, Environment Technology Laboratories., NEC Corporation pp. 785
Jie Chen, United Graduate School of Agriculture, Tokyo University of Agriculture and Technology
Hisashi Kobayashi, United Graduate School of Agriculture, Tokyo University of Agriculture and Technology pp. 791
| Session F3-2: LCA (2) |
| Session ST1-2: Factor 10 |
| Session ST2-4-1: Promotion of DFE (1) |
| Session ST2-4-2: Promotion of DFE (2) |
Mattias Lindahl, Department of Technology, University of Kalmar, SE-391 29 Kalmar, Sweden pp. 864
| Session ST4-1-1: Industrial Ecology and EcoDesign (1) (Invited Lectures) |
Yuichi Moriguchi, Social and Environmental Systems Division, National Institute for Environmental Studies, pp. 880
| Session ST4-1-2: Industrial Ecology and EcoDesign (2) (Invited Lectures) |
| Session ST4-2-1: Industrial Ecology and EcoDesign (3) (Invited Lectures) |
| Session ST4-2-2: Industrial Ecology and EcoDesign (4) (Invited Lectures) |
| Session ST5-4: Recycling of Individual Products (Current and Future) |
| Session ST6-3: Research Trends in Lead-free Soldering |
| Session ST8-4-1: EcoDesign and Chemical Engineering (1) |
| Session ST8-4-2: EcoDesign and Chemical Engineering (2) |
Idzumi Okajima, Graduate School of Science and Technology, Shizuoka University
Takeshi Sako, Department of Materials Science, Faculty of Engineering, Shizuoka University pp. 986
| Session ST8-4-3: EcoDesign and Chemical Engineering (3) |
Koichi Ikeda, Development Dept. Double Coated Products Div.,Nitto Denko Co.,18 Hirayama Nakahara Toyohashi
Kazuhiko Shibata, Development Dept. Double Coated Products Div.,Nitto Denko Co.,18 Hirayama Nakahara Toyohashi pp. 1007
| Session ST9-4-1: Advanced Technology for Electronics Packaging: JIEP Session (1) |
| Session ST9-4-2: Advanced Technology for Electronics Packaging: JIEP Session (2) |
| Session ST10-3: Low-Temperature Lead-Free Solder |
| Session ST11-3: IMS Project on Lead-Free soldering EFSOT |
| Poster Session | Usage of this product signifies your acceptance of the Terms of Use.
| | | | | | | |
