• E
  • ECODESIGN
  • 1999
  • First International Symposium on Environmentally Conscious Design and Inverse Manufacturing
Advanced Search 
First International Symposium on Environmentally Conscious Design and Inverse Manufacturing
Tokyo, Japan
February 01-February 03
ISBN: 0-7695-0007-2
Table of Contents
Plenary I
Plenary II
Plenary III: Inverse Manufacturing Forum
Plenary IV: Environmental Strategies by Japanese, U.S., and European Industries
Session: Closing Remarks
Mega Trend of EcoDesign
Session A1-1: Environmentally Conscious Design I
Session A1-2: Environmentally Conscious Design II
Session A1-3: Environmentally Conscious Design III
F. Giudice, University of Catania
G. La Rosa, University of Catania
A. Risitano, University of Catania
pp. 71
Session A1-4: Environmentally Conscious Design Assessment I
Session A1-5: Environmentally Conscious Design Assessment II
Wim Dewulf, Katholieke Universiteit Leuven
Paul Sas, Katholieke Universiteit Leuven
Hendrik van Brussel, Katholieke Universiteit Leuven
pp. 120
Session A1-6: Environmental Information Sharing
T. Naito, Mitsubishi Electric Corporation
T. Kashima, Mitsubishi Electric Corporation
pp. 154
Session B1-1: Design of Environmentally Conscious Society
Session B1-2: Environmentally Conscious Enterprises and Business I
Session B1-3: Environmentally Conscious Enterprises and Business II
Development of EcoIndustrial Park in Gunma
Session C1-1: Ecomaterials - Current State and New Concept I
Renewable Resources: Visions for the Future
Session C1-2: Ecomaterials - Current State and New Concept II
Session C1-3: Ecomaterials - New Materials I
Session C1-4: Automation in Recycling
Y. Uchiyama, Mitsubishi Materials Corporation
R. Fujisawa, Mitsubishi Materials Corporation
Y. Oda, Mitsubishi Materials Corporation
E. Hirasawa, Mitsubishi Materials Corporation
pp. 258
Session C1-5: Recyclability Assessment
Disassemblability Evaluation Based on Experimental Data
H. Pötter, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
H. Griese, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
A. Middendorf, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
G. Fotheringham, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
H. Reichl, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
pp. 288
Session C1-6: Environmentally Conscious Office Products
Session A2-1: Environmentally Conscious Design IV
Session A2-2: Design Methods I
Session A2-3: Design Methods II
Session A2-4: Environmentally Conscious Design Tools I
Session A2-5: Case Studies of Environmentally Conscious Design I
Session A2-6: Case Studies of Environmentally Conscious Design II
D. Schmoeckel, Darmstadt University of Technology
G.F. von Schlotheim, Darmstadt University of Technology
A. Wansel, Darmstadt University of Technology
pp. 414
D. Schmoeckel, Darmstadt University of Technology
A. Wansel, Darmstadt University of Technology
G.F. von Schlotheim, Darmstadt University of Technology
pp. 427
Session A2-7: Industrial Design I
Session A2-8: Industrial Design II
Session B2-1: Environmentally Conscious Manufacturing Paradigm
Session B2-2: Consumers and Society
Marília de Souza Faria, University of Technology of Compi?gne
Andréa Franco Pereira, University of Technology of Compi?gne
Pierre-Henri Dejean, University of Technology of Compi?gne
pp. 497
Session B2-3: Eco-Labeling and Environmental Management Systems
Session A2-9: Life Cycle Management
G. Ries, Swiss Federal Institute of Technology
R. Winkler, Swiss Federal Institute of Technology
R. Züst, Swiss Federal Institute of Technology
pp. 527
Session C2-1: Ecomaterials - New Materials II
Thermal Shock Resistance of Woodceramics to Repeated Quenching
Session C2-2: Ecomaterials - Metals
Chromium Free Surface Treatment for Magnesium Alloy
Session C2-3: Disassembly Process
G. Seliger, Technical University of Berlin
K. Mueller, Technical University of Berlin
H. Perlewitz, Technical University of Berlin
pp. 989
Y. Inada, Toyo Engineering Corporation
H. Yamamoto, Toyo Engineering Corporation
S. Shibata, Toyo Engineering Corporation
T. Fukuda, Toyo Engineering Corporation
N. Kubota, Toyo Engineering Corporation
pp. 576
Session C2-4: Disassembly Analysis
Inverse Manufacturing Systems Optimization through Disassembly Analysis
Session C2-5: Research Trends and New Materials in Lead-Free Soldering
Session C2-6: Microstructures and Properties of Lead-Free Solders
Session C2-7: Organic Wastes Treatment I
Session C2-8: Organic Wastes Treatment II
Session A3-1: Environmentally Conscious Design Tools II
Modeling and Model Execution in Support of Total Life Cycle
Session A3-2: Environmentally Conscious Design Tools III
Session A3-3: Environmentally Conscious Design Tools IV
Session A3-4: Design for X (I)
Evaluating Design for Disassembly and Economical Solutions of Inverse Manufacturing
Mitsuro Hattori, Mechanical Engineering Laboratory, MITI
Tohru Waida, Mechanical Engineering Laboratory, MITI
pp. 740
Session A3-5: Design for X (II)
Strategic Parts Selection for Material Recycling
N.F. Nissen, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
H. Griese, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
A. Middendorf, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
J. Müller, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
H. Pötter, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
H. Reichl, Fraunhofer-Institut f?r Zuverl?ssigkeit und Mikrointegration (IZM)
pp. 754
Niall Murtagh, Mitsubishi Electric Corporation
Takao Bamba, Mitsubishi Electric Corporation
Kenzo Iwama, Applied Engineering Corporation
pp. 766
Session A3-6: Design for X (III)
Session B3-1: Corporate Strategic Responses to Environmental Trends I
Lessons I Have Learned in Rainforests (Keynote)
Session B3-2: Corporate Strategic Responses to Environmental Trends II
Session C3-1: Separation and Sorting
Session C3-2: Cleaner Process with Reduced Environmental Impact
Session C3-3: Energy Saving Technologies
FESCO's Business Structure and Strategies (Invited)
Session C3-4: Maintenance Engineering and Service Engineering I
Strategies for Product Life-Cycle Support in an Information Age (Keynote)
I. Goncharenko, The University of Tokyo
F. Kimura, The University of Tokyo
pp. 862
Session C3-5: Maintenance Engineering and Service Engineering II
Session C3-6: Selective Recovery
Y. Takeshita, NTT Science and Core Technology Laboratory Group
Y. Sato, NTT Science and Core Technology Laboratory Group
S. Nishi, NTT Science and Core Technology Laboratory Group
pp. 906
Session CP-1: Ecomaterial
Session CP-2: Recycling
H. Yamamoto, Toyo Engineering Corporation
S. Shibata, Toyo Engineering Corporation
H. Neijenhuis, Toyo Engineering Corporation
pp. 942
Recycling Technology of Composite Materials
Session CP-3: Waste Treatments
Disassembling and Selective Material Recovering Process of Vacuum Aided Recycling Systems Technology (VARS Tech.)
Haru Hisa Uchida, Tokai University
Yuka Ozu, Tokai University
Shigeru. Ohga, Yamaichi New Technology
Makoto Ohga, Yamaichi New Technology
pp. 985
Session CP-4: Cleaner Processes
Session CP-5: Lead-Free Solder
Reliability of Sn-Zn-Bi Bonding Formed under Air Reflow
Effect of Bismuth and Copper on the Creep Properties of Sn-3.5 Ag Solder Alloy
Evaluation of Wetting Properties for Sn-Ag-X System Solder by Modified Wetting Balance Technique
Lift-Off Phenomenon in Sn-Bi Allows and Effect of Alloying Elements
Usage of this product signifies your acceptance of the Terms of Use.