• A
  • AQTR
  • 2010
  • 2010 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR)
Advanced Search 
2010 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR)
Cluj-Napoca, Romania
May 28-May 30
ISBN: 978-1-4244-6724-2
Table of Contents
Papers
Staff (PDF)
pp. iii
Content (PDF)
pp. xi-xxii
Yu Pang, Dept. of Electrical and Computer Engineering, McGill University, Montreal, Canada
O. Sarbishei, Dept. of Electrical and Computer Engineering, McGill University, Montreal, Canada
K. Radecka, Dept. of Electrical and Computer Engineering, McGill University, Montreal, Canada
Zeljko Zilic, Dept. of Electrical and Computer Engineering, McGill University, Montreal, Canada
pp. 1-6
V. I. Hahanov, Computer Engineering Faculty, Kharkov National University of Radioelectronics, Kharkov, Ukraine
Wajeb Gharibi, Kingdom of Saudi Arabia, Jazan University
Olesya Guz, Road Transport Faculty, Donetsk Institute of Road Transport, Donetsk, Ukraine
pp. 1-5
A. Suciu, Technical University of Cluj-Napoca, Romania
K. Marton, Technical University of Cluj-Napoca, Romania
I. Nagy, Technical University of Cluj-Napoca, Romania
I. Pinca, Technical University of Cluj-Napoca, Romania
pp. 1-6
Andrea Miele, Dipartimento di Automatica e Informatica, I-10129, Torino, Italy
Politecnico di Torino, Dipartimento di Automatica e Informatica, I-10129, Torino, Italy
pp. 1-6
C. Malz, Institute of Industrial Automation and Software Engineering, University of Stuttgart
N. Jazdi, Institute of Industrial Automation and Software Engineering, University of Stuttgart
pp. 1-6
N. Hatami, Politecnico di Torino
P. Prinetto, Politecnico di Torino
A. Trapanese, Politecnico di Torino
pp. 1-5
Clauirton A Siebra, Informatics Department, Federal University of Paraiba, Joao Pessoa, Brazil
Nancy L Lino, Cm/Samsung Laboratory of Research and Development, Federal University of Pernambuco, Recife, Brazil
Fabio Q B Silva, Cm/Samsung Laboratory of Research and Development, Federal University of Pernambuco, Recife, Brazil
Andre L M Santos, Cm/Samsung Laboratory of Research and Development, Federal University of Pernambuco, Recife, Brazil
pp. 1-6
A. Beck, Institute of Industrial Automation and Software Engineering, University of Stuttgart
N. Jazdi, Institute of Industrial Automation and Software Engineering, University of Stuttgart
pp. 1-6
Gabriel Popa, Polytechnic University of Bucharest
Cristinel Ilie, National Institute of Research and Development for Electrical Engineering - ICPE-CA
Ion Potarnuche, SC ICPE-ACTEL SA
Horea Galos, SC REMARUL February 16 SA - Cluj Napoca
Valerius Stanciu, SC ICPE SA
Sorin Arsene, Polytechnic University of Bucharest
pp. 1-6
M. Vinatoru, University of Craiova, Faculty of Automation, Computers and Electronics
pp. 1-6
Mugurel Ionut Andreica, Politehnica University of Bucharest, Computer Science Department
Nicolae Tapus, Delft University of Technology, Parallel and Distributed Systems Group
Johan Pouwelse, Delft University of Technology, Parallel and Distributed Systems Group
pp. 1-6
N. A. Banciu, Siemens Program and System Engineering Brasov, Corporate Technology Central Eastern Europe Department, Romania
G. Toacse, Transilvania University of Brasov
pp. 1-6
E. I. Vatajelu, Universitat Politècnica de Catalunya, Electronic Engineering Department
J. Figueras, Universitat Politècnica de Catalunya, Electronic Engineering Department
pp. 1-6
C. Maican, University of Craiova
M. Vinatoru, University of Craiova
G. Canureci, IPA CIFATT Craiova
pp. 1-6
G. Canureci, IPA CIFATT Craiova
M. Vinatoru, University of Craiova
C. Maican, University of Craiova
G. Vladut, IPA CIFATT Craiova
pp. 1-6
B. Tarnauca, Siemens Program and System Engineering, Corporate Technologies
C. Suciu, Transilvania University of Brasov, Department of Automation
D. Floroian, Transilvania University of Brasov, Department of Automation
pp. 1-6
Ciprian-Leonard Pitu, Siemens Program and System Engineering Brasov, Corporate Technology Central Eastern Europe Department, Romania
Carmen-Melinda Blendea, Siemens Program and System Engineering Brasov, Corporate Technology Central Eastern Europe Department, Romania
Radu Campeanu, Universitatea Transilvania Brasov, Catedra de Automatica, Romania
pp. 1-5
C. D. Comeaga, Department of Mechatronics and Precision Mechanics, University Politehnica of Bucharest, Romania
L. Bogatu, Department of Mechatronics and Precision Mechanics, University Politehnica of Bucharest, Romania
G. Ionascu, Department of Mechatronics and Precision Mechanics, University Politehnica of Bucharest, Romania
N. Alexandrescu, Department of Mechatronics and Precision Mechanics, University Politehnica of Bucharest, Romania
A. Sandu, Department of Strength of Materials, University Politehnica of Bucharest, Romania
E. Manea, National Institute for R&D in Microtechnologies, Bucharest, Romania
pp. 1-6
Valentin Andrei, SOFTWIN, Bucharest, Romania
Eduard C. Popovici, ETTI Faculty, UPB, Bucharest, Romania
Octavian Fratu, ETTI Faculty, UPB, Bucharest, Romania
Simona V. Halunga, ETTI Faculty, UPB, Bucharest, Romania
pp. 1-6
Dan Necsulescu, University of Ottawa
Sharareh Bayat, University of Ottawa
Alina Dinca, C. Brancusi University Tg-Jiu
Jurek Sasiadek, Carleton University
pp. 1-4
Agoston Katalin, “Petru Maior” University of Tg. Mures
pp. 1-4
E. Cebuc, Technical University of Cluj-Napoca, Romania
A. Suciu, Technical University of Cluj-Napoca, Romania
K. Marton, Technical University of Cluj-Napoca, Romania
S. Dolha, Technical University of Cluj-Napoca, Romania
L. Muresan, Technical University of Cluj-Napoca, Romania
pp. 1-6
Dan Chiorean, Babes-Bolyai University, Cluj-Napoca
Vladiela Petrascu, Babes-Bolyai University, Cluj-Napoca
Ileana Ober, Universite´ Paul Sabatier, Toulouse
pp. 1-6
E. Sipos, Technical University of Cluj-Napoca
C. Miron, Technical University of Cluj-Napoca
pp. 1-6
Marius Neag, Technical University of Cluj-Napoca, Str. C. Daicoviciu Nr. 15, 400020 Cluj-Napoca, Romania
Raul Onet, Technical University of Cluj-Napoca, Str. C. Daicoviciu Nr. 15, 400020 Cluj-Napoca, Romania
Robert Groza, Technical University of Cluj-Napoca, Str. C. Daicoviciu Nr. 15, 400020 Cluj-Napoca, Romania
Marina Topa, Technical University of Cluj-Napoca, Str. C. Daicoviciu Nr. 15, 400020 Cluj-Napoca, Romania
pp. 1-5
V. Olaru, Technical University of Cluj Napoca
A. Hangan, Technical University of Cluj Napoca
Gh. Sebestyen, Technical University of Cluj Napoca
pp. 1-6
B. S. Kirei, Tehnical University of Cluj-Napoca, Cluj-Napoca, Romania
M. Neag, Tehnical University of Cluj-Napoca, Cluj-Napoca, Romania
M. D. Topa, Tehnical University of Cluj-Napoca, Cluj-Napoca, Romania
pp. 1-4
Cs. Szasz, Department of Electrical Drives and Robots, Technical University of Cluj, RO-400020 Cluj, 15, C. Daicoviciu St, Romania
V. Chindris, Department of Electrical Drives and Robots, Technical University of Cluj, RO-400020 Cluj, 15, C. Daicoviciu St, Romania
pp. 1-6
George Dan Mois, Technical University of Cluj-Napoca
Stelian Flonta, Technical University of Cluj-Napoca
Iulia Stefan, Technical University of Cluj-Napoca
Szilard Enyedi, Technical University of Cluj-Napoca
Liviu Cristian Miclea, Technical University of Cluj-Napoca
pp. 1-5
Toma Patarau, Department of Applied Electronic, Technical University of Cluj, St. C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
Dorin Petreus, Department of Applied Electronic, Technical University of Cluj, St. C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
Radu Duma, Department of Automatic Control, Technical University of Cluj, St. C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
Petru Dobra, Department of Automatic Control, Technical University of Cluj, St. C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
pp. 1-6
Calin Mihailescu, Politechnica University of Bucharest
Neculai Galan, Politechnica University of Bucharest
Dumitru Mihailescu, Ecological University of Bucharest
Vasile Tulbure, Ecological University of Bucharest
pp. 1-3
A. Tulbure, University “1 Decembrie 1918” of Alba-Iulia
D. Turschner, Technical University of Clausthal-Zellerfeld, Germany
M. Abrudean, Technical University of Cluj-Napoca
E. Ceuca, University “1 Decembrie 1918” of Alba-Iulia
R. Ormenisan, Technical University of Cluj-Napoca
pp. 1-5
C. Cristescu, Hydraulics and Pneumatics Research Institute-INOE 2000-IHP
P. Drumea, Hydraulics and Pneumatics Research Institute-INOE 2000-IHP
C. Dumitrescu, Hydraulics and Pneumatics Research Institute-INOE 2000-IHP
pp. 1-5
D. G. Bodean, Technical University of Moldova
Gh. C. Bodean, Technical University of Moldova
pp. 1-6
Saman Khoshbakht, Department of Computer Engineering and Information Technology, Amirkabir University of Technology
Hamid R. Zarandi, Department of Computer Engineering and Information Technology, Amirkabir University of Technology
pp. 1-7
Somayeh Bahramnejad, Department of Computer Engineering and Information Technology, Amirkabir University of Technology
Hamid Reza Zarandi, Department of Computer Engineering and Information Technology, Amirkabir University of Technology
Maryam Shojaei, Department of Computer Engineering, University of Isfahan
pp. 1-6
Eugen Pop, SC IPA SA, 169, Calea Floreasca Street, Building P1, Bucharest, 014459, Romania
Mihai Barbos, SC IPA SA, 169, Calea Floreasca Street, Building P1, Bucharest, 014459, Romania
pp. 1-6
Abed Alrahim Yassine, G-SCOP lab, INPG, CNRS UMR 5272, BP 46, F-38402 Saint Martin d'Hères Cedex, France
Albert Rosich, Albert Rosich, Universitat Politecnica de Catalunya, Automatic Control Department (ESAII), Spain
Stephane Ploix, G-SCOP lab, INPG, CNRS UMR 5272, BP 46, F-38402 Saint Martin d'Hères Cedex, France
pp. 1-6
Alfredo Benso, Department of Control and Computer Engineering, Politecnico di Torino, I-10129, Torino, Italy
Stefano Di Carlo, Department of Control and Computer Engineering, Politecnico di Torino, I-10129, Torino, Italy
Gianfranco Politano, Department of Control and Computer Engineering, Politecnico di Torino, I-10129, Torino, Italy
Alessandro Savino, Department of Control and Computer Engineering, Politecnico di Torino, I-10129, Torino, Italy
pp. 1-6
Eugen Iancu, Department of Automation, University of Craiova
Ionela Iancu, University of Medicine and Pharmacy of Craiova
Veronica Sfredel, University of Medicine and Pharmacy of Craiova
pp. 1-6
C. Vicas, Technical University of Cluj-Napoca, Romania
M. Lupsor, 3rd Medical Clinic, Cluj-Napoca, Romania
R. Badea, 3rd Medical Clinic, Cluj-Napoca, Romania
S. Nedevschi, Technical University of Cluj-Napoca, Romania
pp. 1-5
Gheorghe Sebestyen, Universitatea Tehnica Cluj Napoca
Lorand Krucz, Universitatea Tehnica Cluj Napoca
pp. 1-6
S. Gosav, University “Dunarea de Jos” of Galati, Mirela
M. Praisler, University “Dunarea de Jos” of Galati, Mirela
pp. 1-5
D. Mitrea, Computer Science Department, Technical University of Cluj-Napoca
S. Nedevschi, Computer Science Department, Technical University of Cluj-Napoca
M. Lupsor, Department of Ultrasonography, 3rd Medical Clinic, Cluj-Napoca
M. Socaciu, Department of Ultrasonography, 3rd Medical Clinic, Cluj-Napoca
R. Badea, Department of Ultrasonography, 3rd Medical Clinic, Cluj-Napoca
pp. 1-6
A. I. Mitrea, Technical Univ. of Cluj Napoca
A. Prodan, Univ. of Medicine and Pharmacy "Iuliu Hatieganu" Cluj Napoca
P. Mitrea, Technical Univ. of Cluj Napoca
F. Gavrilas, Univ. of Medicine and Pharmacy "Iuliu Hatieganu" Cluj Napoca
V. Oprea, Univ. of Medicine and Pharmacy "Iuliu Hatieganu" Cluj Napoca
O. M. Gurzau, Technical Univ. of Cluj Napoca
R. Cimpean, Univ. of Medicine and Pharmacy "Iuliu Hatieganu" Cluj Napoca
M. Mesaros, Univ. of Medicine and Pharmacy "Iuliu Hatieganu" Cluj Napoca
pp. 1-6
Gratiela Deak, Technical University of Cluj-Napoca
Radu Miron, Technical University of Cluj-Napoca
Adina Astilean, Technical University of Cluj-Napoca
Claudiu Domuta, Technical University of Cluj-Napoca
pp. 1-5
Mihaela Manisor, Technical University of Cluj-Napoca
C. Marcu, Technical University of Cluj-Napoca
Paula Raica, Technical University of Cluj-Napoca
G. Tomoaia, “Iuliu Hatieganu” University of Medicine and Pharmacy, Cluj-Napoca
L. Miclea, Technical University of Cluj-Napoca
pp. 1-6
S. Herle, Department of Automation, Technical University of Cluj-Napoca, Romania, C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
S. Man, Department of Automation, Technical University of Cluj-Napoca, Romania, C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
Gh. Lazea, Department of Automation, Technical University of Cluj-Napoca, Romania, C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
R. Robotin, Department of Automation, Technical University of Cluj-Napoca, Romania, C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
C. Marcu, Department of Automation, Technical University of Cluj-Napoca, Romania, C. Daicoviciu 15, 400020 Cluj-Napoca, Romania
pp. 1-6
Vladiela Petrascu, Babes-Bolyai University, Cluj-Napoca
Gabriela Czibula, Babes-Bolyai University, Cluj-Napoca
Dana Sirbu, “Iuliu Hatieganu” University, Cluj-Napoca
Monica Popa, “Iuliu Hatieganu” University, Cluj-Napoca
Daniela Curseu, “Iuliu Hatieganu” University, Cluj-Napoca
pp. 1-6
Laura Poanta, Second department of Internal Medicine, University of Medicine and Pharmacy Iuliu Hatieganu Cluj Napoca
Daniel Rusu, Second department of Internal Medicine, University of Medicine and Pharmacy Iuliu Hatieganu Cluj Napoca
D L Dumitrascu, Second department of Internal Medicine, University of Medicine and Pharmacy Iuliu Hatieganu Cluj Napoca
pp. 1-4
Andreea Udrea, Automatic Control and Computers Science; Mathematics Department, University “Politehnica” of Bucharest, Romania
Luminita Costache, Automatic Control and Computers Science; Mathematics Department, University “Politehnica” of Bucharest, Romania
Mircea Olteanu, Automatic Control and Computers Science; Mathematics Department, University “Politehnica” of Bucharest, Romania
Dumitru Popescu, Automatic Control and Computers Science; Mathematics Department, University “Politehnica” of Bucharest, Romania
pp. 1-6
C. Radu, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
M. Grigorescu, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
M. Lupsor, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
C. Vicas, Technical University of Cluj-Napoca
S Nedevschi, Technical University of Cluj-Napoca
R. Badea, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
M D Grigorescu, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
Z. Sparchez, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
D. Crisan, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
D. Feier, “Iuliu Hatieganu” University of Medicine and Pharmacy Cluj Napoca
pp. 1-5
D. Paun, Technical University of Cluj Napoca, Romania
D. Sauciuc, Technical University of Cluj Napoca, Romania
O. Stan, Technical University of Cluj Napoca, Romania
O. Iosif, Technical University of Cluj Napoca, Romania
C. Dehelean, Technical University of Cluj Napoca, Romania
L. Miclea, Technical University of Cluj Napoca, Romania
pp. 1-6
H. A. Colosi, University of Medicine and Pharmacy „Iuliu Hatieganu”, Cluj-Napoca
M. N. Roman, Technical University, Cluj-Napoca
pp. 1-6
H. Demea, Ophthalmologic Center-Review, Cluj-Napoca
S. Demea, Ophthalmologic Center-Review, Cluj-Napoca
Rodica Holonec, Technical University of Cluj-Napoca
pp. 1-6
M. Lupsor, 3rd Medical Clinic, University of Medicine and Pharmacy Cluj Napoca
R. Badea, 3rd Medical Clinic, University of Medicine and Pharmacy Cluj Napoca
C. Vicas, Technical University of Cluj-Napoca
S Nedevschi, Technical University of Cluj-Napoca
M. Grigorescu, 3rd Medical Clinic, University of Medicine and Pharmacy Cluj Napoca
C. Radu, 3rd Medical Clinic, University of Medicine and Pharmacy Cluj Napoca
H Stefanescu, 3rd Medical Clinic, University of Medicine and Pharmacy Cluj Napoca
D. Crisan, 3rd Medical Clinic, University of Medicine and Pharmacy Cluj Napoca
pp. 1-6
V. Rocha, INOVAMAIS
P. Borza, Transilvania University of Brasov, Electronics and Computers Department
J. Correia, INOVAMAIS
G. Goncalves, Informatics Engineering Department, University of Porto
A. Puscas, Transilvania University of Brasov, Electronics and Computers Department
R. Seromenho, Transilvania University of Brasov, Electronics and Computers Department
A. Picano, LABOR
S. Cocorada, Transilvania University of Brasov, Electronics and Computers Department
M. Carp, Transilvania University of Brasov, Electronics and Computers Department
pp. 1-9
A. F. Pop, Technical University of Cluj-Napoca, Romania
M. Arghir, Technical University of Cluj-Napoca, Romania
pp. 1-4
R. Racasan, Technical University of Cluj Napoca
D. Popescu, Technical University of Cluj Napoca
C. Neamtu, Technical University of Cluj Napoca
M. Dragomir, Technical University of Cluj Napoca
pp. 1-5
O. Stan, Faculty of Automation and Computer Science, Department of Automation, Technical University of Cluj Napoca, Cluj-Napoca, Romania
N. O. Iosif, Intelmed SRL, Cluj-Napoca, Romania
S. Dehelean, Intelmed SRL, Cluj-Napoca, Romania
D. G. Sauciuc, Faculty of Automation and Computer Science, Department of Automation, Technical University of Cluj Napoca, Cluj-Napoca, Romania
I. D. Paun, Faculty of Automation and Computer Science, Department of Automation, Technical University of Cluj Napoca, Cluj-Napoca, Romania
C. Dehelean, Faculty of Automation and Computer Science, Department of Automation, Technical University of Cluj Napoca, Cluj-Napoca, Romania
L. Miclea, Faculty of Automation and Computer Science, Department of Automation, Technical University of Cluj Napoca, Cluj-Napoca, Romania
pp. 1-5
Vasile Surducan, National Institute for R&D of Isotopic and Molecular Technologies Cluj-Napoca
Emanoil Surducan, National Institute for R&D of Isotopic and Molecular Technologies Cluj-Napoca
Radu Ciupa, Technical University Cluj-Napoca
Marius N. Roman, Technical University Cluj-Napoca
pp. 1-6
Adina Astilean, Technical University of Cluj-Napoca, Automation Department, Romania
Camelia Avram, Technical University of Cluj-Napoca, Automation Department, Romania
Silviu Folea, Technical University of Cluj-Napoca, Automation Department, Romania
Iuliana Silvasan, Technical University of Cluj-Napoca, Automation Department, Romania
Dumitru Petreus, Technical University of Cluj-Napoca, Automation Department, Romania
pp. 1-6
R. Antohi, IPA SA Bucuresti
C. Ogescu, IPA SA Bucuresti
F. Udrescu, IPA SA Bucuresti
M. Onofriescu, UMF “Gr. T. Popa” Iasi
D. Bistriceanu, IPA SA Bucuresti
L. Stefan, ITC SA Bucuresti
S. Dumitru, ITC SA Bucuresti
pp. 1-4
T. Sanislav, IPA - R&D Institute for Automation
D. Capatina, IPA - R&D Institute for Automation
A. Guran, IPA - R&D Institute for Automation
G. Cojocar, IPA - R&D Institute for Automation
I. Stoian, IPA - R&D Institute for Automation
pp. 1-6
Usage of this product signifies your acceptance of the Terms of Use.