• A
  • AQTR
  • 2008
  • 2008 IEEE International Conference on Automation, Quality and Testing, Robotics
Advanced Search 
2008 IEEE International Conference on Automation, Quality and Testing, Robotics
Cluj-Napoca, Romania
May 22-May 25
ISBN: 978-1-4244-2576-1
Table of Contents
Papers
Valter Rocha, Agilus I+D, Portugal
Ricardo Seromenho, Agilus I+D, Portugal
Joao Correia, Agilus I+D, Portugal
Alessandro Mascioletti, LABOR, Italy
Alfredo Picano, LABOR, Italy
Gil Goncalves, Informatics Engineering Department, University of Porto, Portugal
pp. 37-42
Petrica Badea, Department of Biostatistics, University of Medicine and Pharmacy Craiova, Romania
Daniela Danciu, Department of Automatic Control, University of Craiova, Romania
Livia Davidescu, Department of Ophtalmology, Universitary Hospital Craiova, Romania
pp. 43-48
B. Vigaru, Johns Hopkins University, USA
D. Petrisor, Johns Hopkins University, USA
A. Patriciu, McMaster University, Canada
D. Mazilu, National Institutes of Health, USA
D. Stoianovici, Johns Hopkins University, USA
pp. 49-52
O. Dancea, IPA SA Cluj Subsidiary, Romania
M. Gordan, Technical University of Cluj Napoca, Romania
M. Dragan, IPA SA Cluj Subsidiary, Romania
I. Stoian, IPA SA Cluj Subsidiary, Romania
S. Nedevschi, Technical University of Cluj Napoca, Romania
pp. 53-56
LD Rusu, University of Pharmacy and Medicine Iuliu Hatieganu Cluj-Napoca, Romania
Laura Poanta, University of Pharmacy and Medicine Iuliu Hatieganu Cluj-Napoca, Romania
Cristina Hotoleanu, University of Pharmacy and Medicine Iuliu Hatieganu Cluj-Napoca, Romania
Lucica Coldea Agoston, University of Pharmacy and Medicine Iuliu Hatieganu Cluj-Napoca, Romania
D Zdrenghea, University of Pharmacy and Medicine Iuliu Hatieganu Cluj-Napoca, Romania
DL Dumitrascu, University of Pharmacy and Medicine Iuliu Hatieganu Cluj-Napoca, Romania
pp. 57-59
Ionela Iancu, University of Medicine and Pharmacy of Craiova, Romania
Maria Mota, University of Medicine and Pharmacy of Craiova, Romania
E. Iancu, Department of Automation, University of Craiova, Romania
pp. 60-65
Adina Pop, Technical University of Cluj - Napoca, Automation Department, Ghe., Baritiu st, nr. 26, Romania
Camelia Avram, Technical University of Cluj - Napoca, Automation Department, Ghe., Baritiu st, nr. 26, Romania
Honoriu Valean, Technical University of Cluj - Napoca, Automation Department, Ghe., Baritiu st, nr. 26, Romania
pp. 66-71
D. Curseu, University of Medicine and Pharmacy Cluj-Napoca, Romania
M. Popa, University of Medicine and Pharmacy Cluj-Napoca, Romania
D. Sirbu, University of Medicine and Pharmacy Cluj-Napoca, Romania
Z. Moldovan, National Institute of Research and Development for Isotopic and Molecular Technology, Cluj-Napoca, Romania
pp. 72-76
Mihai Munteanu, Technical University of Cluj-Napoca, Romania
Corneliu Rusu, Technical University of Cluj-Napoca, Romania
Dan Rafiroiu, Technical University of Cluj-Napoca, Romania
Gabriel Chindris, Technical University of Cluj-Napoca, Romania
Radu A. Munteanu, Technical University of Cluj-Napoca, Romania
Rozica Moga, Technical University of Cluj-Napoca, Romania
pp. 77-80
C. Plaisanu, SC IPA SA, Bucharest, Romania
C. Stefan, SC IPA SA, Bucharest, Romania
C. Ogescu, SC IPA SA, Bucharest, Romania
D. Bistriceanu, SC IPA SA, Bucharest, Romania
A. Enache, SC IPA SA, Bucharest, Romania
pp. 86-89
G. Tomoaia, UMF ¿Iuliu Hatieganu¿ Cluj-Napoca, Romania
H. Benea, UMF ¿Iuliu Hatieganu¿ Cluj-Napoca, Romania
L. Miclea, UT Cluj-Napoca, Romania
pp. 90-93
A. Stoian, L¿Hospital Leman, Thonon-les-Bains, France
R. Ivan, L¿Hospital Leman, Thonon-les-Bains, France
I. Stoian, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
A. Marichescu, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
pp. 94-99
V. Prejmerean, Babe¿-Bolyai University of Cluj-Napoca, Faculty of Mathematics and Computer Science, Romania
M. Frentiu, Babe¿-Bolyai University of Cluj-Napoca, Faculty of Mathematics and Computer Science, Romania
V. Cioban, Babe¿-Bolyai University of Cluj-Napoca, Faculty of Mathematics and Computer Science, Romania
O. Ghiran, SC IPA SA Cluj-Napoca Subsidiary, Romania
pp. 100-105
A. E. Turcu, Technical University of Cluj-Napoca, Romania
D. V. Rafiroiu, Technical University of Cluj-Napoca, Romania
V. Diaz-Zuccarini, University College London, UK
A. J. Narracott, University of Sheffield, UK
D. R. Hose, University of Sheffield, UK
P. V. Lawford, University of Sheffield, UK
pp. 106-111
M. Lupsor, University of Medicine and Pharmacy Cluj-Napoca, Romania
R. Badea, University of Medicine and Pharmacy Cluj-Napoca, Romania
C. Vicas, Technical University of Cluj-Napoca, Romania
S. Nedevschi, Technical University of Cluj-Napoca, Romania
M. Grigorescu, University of Medicine and Pharmacy Cluj-Napoca, Romania
H. Stefanescu, University of Medicine and Pharmacy Cluj-Napoca, Romania
C. Radu, University of Medicine and Pharmacy Cluj-Napoca, Romania
D. Crisan, University of Medicine and Pharmacy Cluj-Napoca, Romania
Z. Sparchez, University of Medicine and Pharmacy Cluj-Napoca, Romania
Al. Serban, University of Medicine and Pharmacy Cluj-Napoca, Romania
H. Branda, University of Medicine and Pharmacy Cluj-Napoca, Romania
pp. 112-117
M. Grigorescu, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj Napoca, Romania
C. Radu, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj Napoca, Romania
M. Lupsor, Technical University of Cluj-Napoca, Romania
C. Vicas, Technical University of Cluj-Napoca, Romania
S. Nedevschi, Technical University of Cluj-Napoca, Romania
R. Badea, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj Napoca, Romania
Z. Sparchez, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj Napoca, Romania
D. Crisan, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj Napoca, Romania
Al. Serban, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj Napoca, Romania
pp. 118-122
D. Mitrea, Computer-Science Department, Technical University of Cluj-Napoca, Baritiu Str. 26-28, Romania
S. Nedevschi, Computer-Science Department, Technical University of Cluj-Napoca, Baritiu Str. 26-28, Romania
M. Lupsor, University of Medicine and Pharmacy, Cluj-Napoca, Romania
R. Badea, University of Medicine and Pharmacy, Cluj-Napoca, Romania
pp. 128-133
D. Capatina, IPA Cluj, Romania
O. Dancea, IPA Cluj, Romania
R. Cazan, IPA Cluj, Romania
A. Golea, UMF Cluj, Romania
C. Boeriu, SMURD Tg. Mures, Romania
A. Stoian, Hospitals Leman France, France
pp. 134-138
Radu Lupsa, Babe¿-Bolyai University, Cluj-Napoca, Romania
Liana Lupsa, Babe¿-Bolyai University, Cluj-Napoca, Romania
Luciana Neamtiu, Oncological Institute ¿I.Chiricu¿¿¿ Cluj-Napoca, Romania
pp. 139-142
M. C. Luculescu, Transilvania University of Brasov, Precision Mechanics and Mechatronics Department, Romania
S. Lache, Transilvania University of Brasov, Precision Mechanics and Mechatronics Department, Romania
pp. 143-148
R. Cazan, IPA Cluj, Romania
O. Dancea, IPA Cluj, Romania
D. Capatina, IPA Cluj, Romania
H. Stefanescu, ¿Iuliu Hatieganu¿University of Medicine and Pharmacy, Romania
R. Badea, ¿Iuliu Hatieganu¿University of Medicine and Pharmacy, Romania
M. Lupsor, ¿Iuliu Hatieganu¿University of Medicine and Pharmacy, Romania
A. Stoian, Hospitals Leman - France
pp. 149-154
H. A. Colosi, University of Medicine and Pharmacy ¿Iuliu Ha¿ieganu¿, Cluj-Napoca, Romania
E.H. Dulf, Technical University, Cluj-Napoca, Romania
M. N. Roman, Technical University, Cluj-Napoca, Romania
A. Achimas, University of Medicine and Pharmacy ¿Iuliu Ha¿ieganu¿, Cluj-Napoca, Romania
pp. 155-159
S. Herle, Department of Automation, Technical University of Cluj-Napoca, Romania
Paula Raica, Department of Automation, Technical University of Cluj-Napoca, Romania
Gh. Lazea, Department of Automation, Technical University of Cluj-Napoca, Romania
R. Robotin, Department of Automation, Technical University of Cluj-Napoca, Romania
C. Marcu, Department of Automation, Technical University of Cluj-Napoca, Romania
L. Tamas, Department of Automation, Technical University of Cluj-Napoca, Romania
pp. 160-165
Mihaela Manisor, Technical University of Cluj-Napoca, Romania
Paula Raica, Technical University of Cluj-Napoca, Romania
L. Miclea, Technical University of Cluj-Napoca, Romania
Teodora Pop, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy, Cluj-Napoca, Romania
Ofelia Mosteanu, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy, Cluj-Napoca, Romania
pp. 166-170
Ofelia Mosteanu, Iuliu Hatieganu University of Medicine and Pharmacy Cluj-Napoca, Romania
Teodora Atena Pop, Iuliu Hatieganu University of Medicine and Pharmacy Cluj-Napoca, Romania
Paula Raica, Technical University of Cluj-Napoca, Romania
Monica Lupsor, Iuliu Hatieganu University of Medicine and Pharmacy Cluj-Napoca, Romania
Mihai Socaciu, Iuliu Hatieganu University of Medicine and Pharmacy Cluj-Napoca, Romania
Liviu Miclea, Technical University of Cluj-Napoca, Romania
Radu Badea, Iuliu Hatieganu University of Medicine and Pharmacy Cluj-Napoca, Romania
pp. 171-175
D.M. Purcaru, University of Craiova, Romania
I. Purcaru, VIG Impex, Craiova, Romania
C. Gordan, University of Oradea, Romania
E. Niculescu, University of Craiova, Romania
S.D. Nedelcut, Research, Development and Testing National Institute for Electrical Engineering - Craiova, Romania
pp. 187-192
SmartModels (Abstract)
E. Tundrea, ¿Politehnica¿ University of Timisoara, Romania
pp. 193-199
D. Stanciu, University Politehnica of Bucharest, Faculty of Electronics, Telecommunications and Information Technology, Bucharest, Romania
A. Florescu, University Politehnica of Bucharest, Faculty of Electronics, Telecommunications and Information Technology, Bucharest, Romania
D.A. Stoichescu, University Politehnica of Bucharest, Faculty of Electronics, Telecommunications and Information Technology, Bucharest, Romania
pp. 200-203
Mihaela Gordan, Technical University of Cluj-Napoca, Romania
Ovidiu Dancea, S.C. IPA S.A. CIFATT Cluj, Cluj-Napoca, Romania
Aurel Vlaicu, Technical University of Cluj-Napoca, Romania
Ioan Stoian, S.C. IPA S.A. CIFATT Cluj, Cluj-Napoca, Romania
Odysseas Tsatos, ALBIODATA S.A Information Systems - Consulting, Larissa, Greece
pp. 207-212
Slawomir Smolen, Department of Mechanical Engineering, Hochschule Bremen, ¿J.R. Mayer Institute for Energy Engineering¿, Neustadswall 30, D 28199, Germany
pp. 213-217
A. Florescu, University Politehnica of Bucharest, Romania
D. Stanciu, University Politehnica of Bucharest, Romania
D.A. Stoichescu, University Politehnica of Bucharest, Romania
C. Radoi, University Politehnica of Bucharest, Romania
pp. 218-223
S. Brad, Technical University of Cluj-Napoca, Romania
M. Fulea, Technical University of Cluj-Napoca, Romania
B. Mocan, Technical University of Cluj-Napoca, Romania
A. Duca, Technical University of Cluj-Napoca, Romania
E. Brad, Technical University of Cluj-Napoca, Romania
pp. 224-229
A. C. Cosoi, University ¿Politehnica¿ Bucharest, Faculty of Automatic Control and Computer Science, Romania
M. S. Vlad, University ¿Politehnica¿ Bucharest, Faculty of Automatic Control and Computer Science, Romania
V. Sgarciu, University ¿Politehnica¿ Bucharest, Faculty of Automatic Control and Computer Science, Romania
pp. 230-233
C. Sacarea, Babes-Bolyai University, Cluj-Napoca, Romania
R. Meza, Babes-Bolyai University, Cluj-Napoca, Romania
M. Cimpoi, Babes-Bolyai University, Cluj-Napoca, Romania
pp. 234-238
I. Dornean, Technical University of Cluj-Napoca, Romania
M. Topa, Technical University of Cluj-Napoca, Romania
B.S. Kirei, Technical University of Cluj-Napoca, Romania
G. Oltean, Technical University of Cluj-Napoca, Romania
pp. 243-246
Silviu Folea, Technical University of Cluj-Napoca, Romania
Marius Ghercioiu, National Instruments Corp. USA
pp. 247-252
B. S. Kirei, Technical University form Cluj-Napoca, Basis of Electronics Department, Romania
M. Topa, Technical University form Cluj-Napoca, Basis of Electronics Department, Romania
V. Popescu, Technical University form Cluj-Napoca, Basis of Electronics Department, Romania
I. Dornean, Technical University form Cluj-Napoca, Basis of Electronics Department, Romania
pp. 253-256
C. Ogescu, IPA S.A. Bucharest, Romania
C. Plaisanu, IPA S.A. Bucharest, Romania
D. Bistriceanu, IPA S.A. Bucharest, Romania
pp. 257-260
Toadere Florin, I.N.C.D.T.I.M Cluj Napoca, Romania
Szopos Ervin, UT Cluj Napoca, Romania
pp. 261-266
V. Ispas, Technical University of Cluj-Napoca, Romania
A. Hordoan, Technical University of Cluj-Napoca, Romania
M. Steopan, Technical University of Cluj-Napoca, Romania
pp. 267-272
Iulian O. Maga, Robert Bosch GmbH, Product Division Pharma, Assembly facility Waiblingen, Germany
pp. 273-276
L. G. Cerban, SC IPA SA- Bucharest, Romania
Al. Botu, SC IPA SA- Bucharest, Romania
A. Badoiu, SC IPA SA- Bucharest, Romania
pp. 277-280
Marton Ors, Technical University of Cluj-Napoca Department of Automatic Control 26-28 Gh. Baritiu Str. 400027, Romania
pp. 281-286
Bogdan Belean, Technical University of Cluj-Napoca, Faculty of Electronics, Telecommunications and Information Technology, Communications Department, Romania
Albert Fazakas, Bases of Electronics Department, Romania
Raul Malutan, Technical University of Cluj-Napoca, Faculty of Electronics, Telecommunications and Information Technology, Communications Department, Romania
Monica Borda, Technical University of Cluj-Napoca, Faculty of Electronics, Telecommunications and Information Technology, Communications Department, Romania
pp. 292-295
O. Capatina, I.P.A. Cluj, Romania
T. Grosan, Universitatea Babes-Bolyai Cluj, Romania
R. Trimbitas, Universitatea Babes-Bolyai Cluj, Romania
pp. 296-299
Rares Cosmin Cazan, SC IPA SA Cluj-Napoca Subsidiary, Romania
Laurentiu Viorel Chirila, SC IPA SA Cluj-Napoca Subsidiary, Romania
Alexandra Marichescu, SC IPA SA Cluj-Napoca Subsidiary, Romania
pp. 300-303
C. A. Bodi, IPA S.A. R&D Institute, Cluj Subsidiary, Romania
N. Bojor, IPA S.A. R&D Institute, Cluj Subsidiary, Romania
I. Kovacs, IPA S.A. R&D Institute, Cluj Subsidiary, Romania
pp. 304-307
O. Ghiran, SC IPA SA Cluj-Napoca Subsidiary, Romania
A. Corha, SC IPA SA Cluj-Napoca Subsidiary, Romania
pp. 308-311
Alina Calarasu, IPA -R&D Institute for Automation- Cluj Subsidiary, Romania
Ioan Stoian, IPA -R&D Institute for Automation- Cluj Subsidiary, Romania
Ovidiu Dancea, IPA -R&D Institute for Automation- Cluj Subsidiary, Romania
Mihaela Gordan, Technical University of Cluj, Romania
Theodor Popescu, National Institute for Research and Development in Informatics, Romania
Radu Campeanu, Transilvania University of Brasov, Romania
pp. 312-315
E. Stancel, SC IPA SA Subsidiary Cluj, Romania
I. Stoian, SC IPA SA Subsidiary Cluj, Romania
I. Kovacs, SC IPA SA Subsidiary Cluj, Romania
B. Z. Gyurka, SC IPA SA Subsidiary Cluj, Romania
Sz. Balogh, SC IPA SA Subsidiary Cluj, Romania
pp. 316-320
M. Mircea, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
I. Kovacs, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
I. Stoian, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
A. Marichescu, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
A. Tepes-Bobescu, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
pp. 321-326
A. Apatean, Technical University of Cluj-Napoca, Romania
A. Rogozan, National Institute of Applied Sciences, Rouen, France
A. Bensrhair, National Institute of Applied Sciences, Rouen, France
pp. 327-332
Horea Demea, Ophthalmological Center - Review, Cluj-Napoca, Romania
Sorina Demea, Ophthalmological Center - Review, Cluj-Napoca, Romania
Rodica Holonec, Technical University of Cluj-Napoca, Romania
pp. 333-336
I. Stoian, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
A. Marichescu, IPA R&D Institute for Automation, Cluj Subsidiary, Romania
M. Gordan, Technical University of Cluj-Napoca, Romania
V. Gavrea, Transilvania Echipamente ¿i Tehnologii Avansate produse în România
pp. 337-342
F. Farcas, INCDTIM, Cluj-Napoca, Romania
G. Popeneciu, INCDTIM, Cluj-Napoca, Romania
B. Attila, INCDTIM, Cluj-Napoca, Romania
C. Morari, INCDTIM, Cluj-Napoca, Romania
S. Belov, JINR, Dubna, Russia
L. Miclea, Technical University Cluj-Napoca, Romania
pp. 343-346
Istvan Gergely Czibula, Department of Computer Science, Babe¿-Bolyai University, Romania
Gabriela Czibula, Department of Computer Science, Babe¿-Bolyai University, Romania
pp. 347-352
Gabriela Czibula, Department of Computer Science, Babe¿-Bolyai University, Romania
Adriana Mihaela Guran, Department of Computer Science, Babe¿-Bolyai University, Romania
Grigoreta Sofia Cojocar, Department of Computer Science, Babe¿-Bolyai University, Romania
Istvan Gergely Czibula, Department of Computer Science, Babe¿-Bolyai University, Romania
pp. 353-358
A. Gut, Technical University of Cluj-Napoca, 15 C. Daicoviciu street, 400020, Romania
L. Miclea, Technical University of Cluj-Napoca, 15 C. Daicoviciu street, 400020, Romania
I. Hoka, Technical University of Cluj-Napoca, 15 C. Daicoviciu street, 400020, Romania
D.C. Duma, Technical University of Cluj-Napoca, 15 C. Daicoviciu street, 400020, Romania
pp. 359-364
A. Suciu, Technical University of Cluj-Napoca, Romania
R. Potolea, Technical University of Cluj-Napoca, Romania
pp. 365-368
I. A. Letia, Technical University of Cluj-Napoca, Computer Science Department, Romania
R. R. Slavescu, Technical University of Cluj-Napoca, Computer Science Department, Romania
pp. 369-373
Alexandru I. Mitrea, Technical University of Cluj-Napoca, Romania
Paulina Mitrea, Technical University of Cluj-Napoca, Romania
pp. 378-383
A. Gut, Technical University of Cluj-Napoca, 15 C. Daicoviciu, 400020, Romania
I. Hoka, Technical University of Cluj-Napoca, 15 C. Daicoviciu, 400020, Romania
L. Miclea, Technical University of Cluj-Napoca, 15 C. Daicoviciu, 400020, Romania
G. Florescu, National Institute for Research and Development in Informatics ICI Bucharest, 8-10 Maresal Averescu, Romania
V. Florescu, National Institute for Research and Development in Informatics ICI Bucharest, 8-10 Maresal Averescu, Romania
pp. 384-389
R. C. Vlad, Technical University of Cluj-Napoca, Romania
C. Morel, École Supérieure d¿Électronique de l¿Ouest-ESEO, France
J. Y. Morel, University of Angers, France
S. Vlad, Technical University of Cluj-Napoca, Romania
pp. 390-395
Camelia Popa, Technical University of Cluj-Napoca, Romania
Florin Pop, Technical University of Cluj-Napoca, Romania
Paul Nemes, Technical University of Cluj-Napoca, Romania
Sonia Vlaicu, ¿Iuliu Hatieganu¿ University of Medicine and Pharmacy Cluj-Napoca, Romania
pp. 396-401
E. Sipos, Technical University of Cluj-Napoca, Romania
G. Oltean, Technical University of Cluj-Napoca, Romania
C. Miron, Technical University of Cluj-Napoca, Romania
pp. 402-407
Petre G. Pop, Technical University of Cluj-Napoca, Romania
Eugen Lupu, Technical University of Cluj-Napoca, Romania
pp. 408-412
R. Terebes, Technical University of Cluj Napoca, Romania
M. Borda, Technical University of Cluj Napoca, Romania
C. Germain, Equipe Signal et Image, LAPS-IMS UMR 5218, Romania
O. Lavialle, Equipe Signal et Image, LAPS-IMS UMR 5218, Romania
S. Pop, Technical University of Cluj Napoca, Romania
pp. 413-418
T. Sanislav, IPA - R&D Institute for Automation, Cluj-Napoca Subsidiary, Romania
D. Capatina, IPA - R&D Institute for Automation, Cluj-Napoca Subsidiary, Romania
L. Miclea, Department of Automation, Technical University of Cluj-Napoca, Romania
pp. 419-422
Mihai Hulea, Technical University of Cluj-Napoca, Romania
Adina Astilean, Technical University of Cluj-Napoca, Romania
Tiberiu Letia, Technical University of Cluj-Napoca, Romania
Radu Miron, Technical University of Cluj-Napoca, Romania
Silviu Folea, Technical University of Cluj-Napoca, Romania
pp. 423-428
C. Alexandru, Transilvania University of Brasov, Romania
C. Pozna, Transilvania University of Brasov, Romania
pp. 434-439
C. Suciu, Universitatea Transilvania Bra¿ov, Romania
R. Campeanu, Universitatea Transilvania Bra¿ov, Romania
A. Campeanu, Universitatea Transilvania Bra¿ov, Romania
I. Margineanu, Universitatea din Craiova, Romania
A. Danila, Universitatea Transilvania Bra¿ov, Romania
pp. 440-443
Stelian Flonta, Technical University of Cluj-Napoca, Romania
Liviu Miclea, Technical University of Cluj-Napoca, Romania
pp. 444-446
L. Bacali, Technical University of Cluj-Napoca, Romania
L. Tudose, Technical University of Cluj-Napoca, Romania
R.C. Cordos, Technical University of Cluj-Napoca, Romania
pp. 447-449
A. Danila, Universitatea Transilvania Bra¿ov, Romania
I. Margineanu, Universitatea Transilvania Bra¿ov, Romania
R. Campeanu, Universitatea Transilvania Bra¿ov, Romania
C. Suciu, Universitatea Transilvania Bra¿ov, Romania
I. Boian, Universitatea Transilvania Bra¿ov, Romania
pp. 450-453
D. Vaju, S.C. I.C.P.E.-Bistrita S.A., 7 Parcului Str., 420035, Romania
C. Festila, S.C. I.C.P.E.-Bistrita S.A., 7 Parcului Str., 420035, Romania
G. Vlad, S.C. I.C.P.E.-Bistrita S.A., 7 Parcului Str., 420035, Romania
pp. 454-459
I. Stoian, SC IPA SA, Romania
E. Stancel, SC IPA SA, Romania
V. Feurdean, INCDTIM Cluj, Romania
L. Feurdean, INCDTIM Cluj, Romania
S. Ignat, SC IPA SA, Romania
M. Cadis, SC IPA SA, Romania
pp. 460-463
C. Vidrighin Bratu, Technical University of Cluj-Napoca, Romania
T. Muresan, Technical University of Cluj-Napoca, Romania
R. Potolea, Technical University of Cluj-Napoca, Romania
pp. 464-469
D. Bonta, Romanian Railway Administration, Romania
V. Tulbure, Ecological University of Bucharest, Romania
Cl. Festila, Technical University of Cluj-Napoca, Romania
pp. 470-472
O. Buza, Technical University of Cluj, Ovidiu, Romania
G.I. Toderean, Technical University of Cluj, Ovidiu, Romania
J. Domokos, Sapientia University of Tirgu Mures, Romania
A. Zs. Bodo, Technical University of Cluj, Romania
pp. 473-478
M. Huzau, Romanian Railway Administration, Romania
Eva-Henrietta Dulf, Technical University of Cluj-Napoca, Romania
V. Tulbure, Ecological University of Bucharest, Romania
Cl. Festila, Technical University of Cluj-Napoca, Romania
pp. 479-482
Daniela Popescu, Technical University of Cluj-Napoca, Romania
S. Popescu, Technical University of Cluj-Napoca, Romania
C. Neamtu, Technical University of Cluj-Napoca, Romania
M. Dragomir, Technical University of Cluj-Napoca, Romania
pp. 483-488
R. Paku, Robert Bosch Hungary, H- 1103 Budapest Gyömröi u. 120, Romania
R. Marschalko, Technical University of Cluj, Faculty of Electrical Engineering, RO-400020, C. Daicoviciu str. No. 15, Romania
pp. 489-494
Robert Groza, Basis of Electronics Department, Technical University of Cluj-Napoca, Romania
Lelia Festila, Basis of Electronics Department, Technical University of Cluj-Napoca, Romania
Erwin Szopos, Basis of Electronics Department, Technical University of Cluj-Napoca, Romania
pp. 495-498
Pop Radu, IEEE Conference Publishing, Technical University of Cluj-Napoca, Automation Department, Str. Baritiu no. 26-28, Romania
Domsa Antoniu, IEEE Conference Publishing, Technical University of Cluj-Napoca, Automation Department, Str. Baritiu no. 26-28, Romania
pp. 499-502
F. Moldoveanu, Transilvania University, Department of Automation, Brasov, Romania
D. Floroian, Transilvania University, Department of Automation, Brasov, Romania
C. Boldisor, Transilvania University, Department of Automation, Brasov, Romania
pp. 503-506
Usage of this product signifies your acceptance of the Terms of Use.